Abstract:Nanoporous gold (NPG) made by dealloying takes the form of a network of nanoscale struts or "ligaments". It is well established that the material's mechanical behavior is strongly affected by its ligament size, <math>L</math>, and by its solid volume fraction, <math>φ</math>. We explore the mechanical behavior of NPG, with an emphasis on establishing a consistent data set with comparable <math>L</math> but covering a significant range of initial <math>φ</math>. Specimens are prepared from Ag-Au master alloys with their Au atom fraction, <math>xAu0</math>, in the range 0.20 - 0.35. Since dealloying replaces Ag with voids, <math>φ</math> may be expected to agree with <math>xAu0</math>. Yet, spontaneous plastic deformation events during dealloying can result in macroscopic shrinkage, decoupling <math>φ</math> from <math>xAu0</math>. This raises the question, how do <math>φ</math> and <math>xAu0</math> separately affect the mechanical behavior? We confirm two recent suggestions, namely i) a modified Roberts-Garboczi-type scaling law for Young's modulus versus <math>φ</math> of the material in its as-prepared state and ii) the relevance of an apparent "load-bearing solid fraction" for Young's modulus as well as strength. Yet, remarkably, we find that stiffness and strength of the as-prepared material show a much better correlation to <math>xAu0</math> as compared to <math>φ</math>. This can be understood as a consequence of the microstructural changes induced by shrinkage. Studying the microstructure evolution during annealing, we also confirm the suggestion that coarsening entails an enhanced loss in stiffness for samples with lesser solid fraction. This finding confirms concerns about the notion of self-similar coarsening as a general behavior of dealloying-made network materials.

A critical relative density and a break-and-reconnect model for annealing-induced densification in nanoporous gold

Transition from Homogeneous to Localized Deformation in Nanoporous Gold

On factors defining the mechanical behavior of nanoporous gold

Atomistic dynamics of disconnection-me diate d grain boundary plasticity: A case study of gold nanocrystals

Mechanical Properties and Scaling Laws of Nanoporous Gold

The ligament-size effect to the coefficient of thermal expansion for nanoporous gold: A molecular dynamics simulation study

Effect of thermal coarsening on the thermal conductivity of nanoporous gold

Stiffening of nanoporous Au as a result of dislocation density increase upon characteristic length reduction

Mechanical properties of unidirectional nanoporous gold under compression

Plastic Deformation in Nanoscale Gold Single Crystals and Open-Celled Nanoporous Gold

Molecular Dynamics Study of Neck Growth in Laser Sintering of Hollow Silver Nanoparticles with Different Heating Rates

Pore and Ligament Size Control, Thermal Stability and Mechanical Properties of Nanoporous Single Crystals of Gold

Atomistic Treatment of Periodic Gold Nanowire Array Nanofasteners under Shear Loading

On the role of Grain Boundary Character in the Stress Corrosion Cracking of Nanoporous Gold Thin Films

Thermal Conductivity of Nanoporous Gold Microwires at Different Annealing Temperatures

Microstructure Effects on Mechanical Properties of FeNiCrCoCu Nanoporous High-Entropy Alloy with Bicontinuous Characteristics

Microfabrication and Mechanical Properties of Nanoporous Gold at the Nanoscale

Coupling dislocation glide-climb model to simulate high temperature anneal hardening in Au submicron pillar

The Radiation Effect of Ion Species on the Microstructure of Nanoporous Gold

Unusual Loading-Dependent Sintering-Resistant Properties of Gold Nanoparticles Supported Within Extra-Large Mesopores

Role of densification in deformation behaviors of model metallic glasses under 3-D nanoindentation studied in molecular dynamics simulation