Abstract:Due to the varying cooling conditions within different internal areas, there is a notable disparity in the cooling rates. This discrepancy has resulted in severe elemental segregation and the formation of coarse M C phases in the Φ508 mm GH4151 superalloy ingot, which has undergone triple smelting (VIM + ESR + VAR). These factors have had detrimental effects on the stability of the alloy structure. The solidification segregation, microstructure evolution, and secondary phase precipitation behaviors of GH4151 alloy under a wide cooling rate range were studied through Differential Scanning Calorimetry (DSC), in situ observations with High-Temperature Confocal Laser Scanning Microscopy (HT-CLSM), Directional Solidification (DS), and Computational Fluid Dynamics (CFD). The results show that the solidification path of GH4151 can be summarized as (1)L → γ (1334.6 °C); (2) L → γ + M C (1281 °C and 1258 °C); (3)L → γ + M C + γ/γ' + Laves (1152 °C); (4)L → γ + M C + γ/γ' + Laves+ M 2 B (1084 °C), where MC, γ/γ', Laves, and M 2 B are the main precipitate types during the solidification process. Mo, Nb, and Ti are the main dendritic segregation elements. Due to the reverse diffusion of solute elements under low cooling rates, the element segregation presents an increasing and then decreasing trend with the increase in cooling rate. The maximum segregation rate occurs at 24 °C/min. The cooling rate dramatically influences the morphology of the solid-liquid interface. The prediction formulas for PDAS and SDAS of GH4151 alloy under slow cooling conditions are λ 1 = 1137.1· V -0.25 · G -0.5 and λ 2 = 153.6· V c -0.32 respectively. Similarly, with the increase of solidification speed, the size of γ' phase, Laves phase, γ/γ' phase, and M C gradually decreases. When the cooling rate exceeds 12 °C/min, the large blocky M C phase evolves into elongated bars. The cooling rate from the center to the surface of the Φ508 mm VAR ingot ranges from 5 to 20 °C/min, with the standout being that the fastest cooling rate at the edge is about 48 °C/min.

Incipient melting phase and its dissolution kinetics for a new superalloy

Investigation of Solidification Behavior in a New High Alloy Ni-Based Superalloy

Identification of Precipitates in the As-cast Microstructure and Its Dissolution Behavior During Homogenization of Difficult-to-Deform GH4141 Superalloy

In Situ Observation of Microstructure and Precipitate Phase Transformation during the Solidification of Mg‐Containing GH3625 Alloy at Different Cooling Rates

Grain Growth Kinetics and γ′ Dissolution Behavior of a Novel Disc Superalloy GH4065A

Solidification Segregation Behavior and Homogenization Heat Treatment of GH4151 Alloy

Solidification behaviour and hot cracking susceptibility of a novel Ni-based superalloy

Microstructure Evolution and Homogenization Kinetics of 15Cr–30Ni–Fe Heat‐Resistant Alloy

The cracking behavior of the new Ni-based Superalloy GH4151 in the triple melting Process

Growth and dissolution behavior and morphology evolution of γ' precipitates in GH4742 nickel-based superalloy

Effect of the cooling rates on the microstructure and segregation characteristics in directionally solidified GH4151 superalloy

Eliminating embrittlement of GH4065A superalloy at intermediate temperature by a novel grain boundary strengthening mechanism

Hot deformation behavior and flow stress modeling of coarse-grain nickel-base GH4151 superalloy ingot materials in cogging

New Research Development of Superalloy GH4169

In-situ Observation of Solidification Process of GH4169 Superalloy at Different Cooling Rates

Investigation on Sub-Solvus Recrystallization Mechanisms in an Advanced γ-γ’ Nickel-Based Superalloy GH4151

Dissolution Behavior of Δ Phase and Its Effects on Deformation Mechanism of GH4169 Alloy

Microstructural Evolution of Wrought-Nickel-Based Superalloy GH4169

Solidification behavior and segregation characteristics of high W-content cast Ni-Based superalloy K416B

Cracking mechanism in as-cast GH4151 superalloy ingot with high γ′; phase content

Microstructural Evolution of a High W Content Ni-Based Superalloy at γ′ Sub-Solvus Temperatures