Abstract:This article constitutes the second installment in a series dedicated to exploring the uncertainties associated with pure rotational Raman–Rayleigh temperature measurement LiDARs in the middle-to-upper atmosphere (20–90 km). It presents uncertainty evaluation methods aimed at addressing the challenge of uncertainty assessment. These methods leverage both the Guide to the Expression of Uncertainty in Measurement (GUM) method and the Monte Carlo method (MCM) to ascertain the uncertainty of air density and temperature derived from LiDAR signals. Within the framework of these evaluation methods, various uncertainty sources are considered, encompassing saturation correction, photon noise, background noise, reference temperature, and two special uncertainty sources: atmospheric transmittance correction in Rayleigh LiDAR and the calibration process in Raman LiDAR. An uncertainty evaluation example in accordance with the proposed evaluation method is provided by employing raw signals from full-chain simulation system introduced in another series paper. In this example, we compare the evaluation results of the GUM method with those derived from the MCM. Our findings reveal consistent trends in different uncertainty components between the two methods. In addition, the uncertainty caused by atmospheric transmittance correction is involved with detailed considerations of correlation and iterative methods. The uncertainty resulting from the calibration process in Raman LiDAR, attributed to its nonlinear characteristics, can only be evaluated using the MCM. These findings affirm the applicability of the proposed uncertainty evaluation methods of pure rotational Raman–Rayleigh LiDAR. This research enhances our understanding of the sources of uncertainty in LiDAR systems and provides a convenient approach for evaluating the data quality of temperature LiDAR.

Verification of the Rician K-Factor-Based Uncertainty Model for Measurements in Reverberation Chambers

Measurement Uncertainty of Antenna Efficiency Measured Using the Two-Antenna Method in a Reverberation Chamber

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

K-factor Evaluation in a Hybrid Reverberation Chamber plus CATR OTA Testing Setup

Empirical Characterization and Modeling of the Propagation Channel Inside the VIRC

Uncorrelated Configurations and Field Uniformity in Reverberation Chambers Stirred by Tunable Metasurfaces

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

Calibration Test of Reverberation Chamber

Radar Cross Section Measurement within Reverberation Chamber: Stirrer position issues

Assessment of Measurement Uncertainty for S-Parameter Measurement Based on Covariance Matrix

Uncertainty of Pure Rotational Raman-Rayleigh LiDAR for Temperature Measurement in Middle-to-Upper Atmosphere: Simulation Method

Study of independent sampling points in a reverberation chamber with two stirrers

An Alternative Method to Identify the Susceptibility Threshold Level of Device under Test in a Reverberation Chamber

Technology of the Reverberation Chamber for EMC Test

Uncertainty of Pure Rotational Raman–Rayleigh LiDAR for Temperature Measurement in Middle-to-Upper Atmosphere: Evaluation Method

Advanced Analysis of Radar Cross-Section Measurements in Reverberation Environment

Nonparametric Modeling and Vibration Analysis of Uncertain Jeffcott Rotor with Disc Offset

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Statistical Analysis of Antenna Efficiency Measurements with Non-Reference Antenna Methods in a Reverberation Chamber.

Empirical Study of Angular-Temporal Spectra in a Reverberation Chamber

Over-the-Air Emulation of Electronically Adjustable Rician MIMO Channels in a Programmable-Metasurface-Stirred Reverberation Chamber