Abstract:In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis.

Optimization of motion parameters measuring system based on the vectors of light beams

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Mathematic Model of Simultaneously Measuring Six-dimensional Parameters by Laser

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Research on high-speed and non-contact angle detection based on laser measurement

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

A Novel Method to Simultaneously Measure the Straightness

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

Modeling and Simulating of Optimization-Design for Structure Parameters of Ccd Intersection Measurement System

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

A measurement method of motion parameters in aircraft ground tests using computer vision

Configuration Optimization Of Photogrammetry System Based On Spectral Radius For On-Orbit Measurement

An Algorithm on Laser Measurement Model of Ultra-precision Motion Stage and Error Compensation

Research on the Visual Measurement Algorithm of Cam Base Circle Radius Based on Virtual Structured Light Plane

Kinematic calibration of a laser tracker based on nonlinear optimization of a refined geometric error model

An error analysis and optimization method for combined measurement with binocular vision