Abstract:The current density-luminance-voltage characteristics of organic light-emitting devices (OLEDs) with N,N′-Bis(naphthalen-1-yl)-N,N′-bis(phenyl) benzidine (NPB) of various thicknesses as the hole transport layer have been investigated. It is found that for conventional structures of indium–tin–oxide/NPB/tris(8-hydroxyquinoline) aluminum (Alq3) (60 nm)/LiF (0.5 nm)/Al the optimal hole injection and luminescence efficiencies appear at NPB thicknesses of 5 and 20 nm, respectively. The large difference between the two optimal thicknesses suggests that the effective block of the NPB layer against electrons from across the Alq3/NPB interface is essential for high-efficiency operation of the OLEDs. The electron blocking effect of NPB is further confirmed by the electroluminescence (EL) behavior of devices with the structure of ITO/NPB(5 nm)/Alq3:4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM) (30 nm)/NPB/Alq3(60 nm)/LiF(0.5 nm)/Al. The proportion of DCM EL to the whole EL decreases with increasing NPB thickness. This suggests that the NPB layer blocks electron transport to the Alq3:DCM layer. The Förster energy transfer from the 60 nm Alq3 layer to the DCM molecules is ruled out by the EL behavior observed after quenching excitons in the Alq3 layer. The origin of the difference in the optimal N,N′-Bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD) thicknesses reported by other two different groups is also discussed.

Origin of Enhanced Hole Injection in Organic Light-Emitting Diodes with an Electron-Acceptor Doping Layer: P-Type Doping or Interfacial Diffusion?

Tungsten Oxide Doped N,N-'-Di(Naphthalen-1-Yl)-N,N-'-Diphenyl-Benzidine As Hole Injection Layer for High Performance Organic Light-Emitting Diodes

A High Tg Small-Molecule Arylamine Derivative As a Doped Hole-Injection/transport Material for Stable Organic Light-Emitting Diodes

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Enhanced Hole Injection by Introducing an Electron-Withdrawing Layer in Inverted Quantum Dot Light-Emitting Diodes

Superior Hole Injection Material PEGDT/TPF/PVDF with p-Doping Capability for Highly Efficient Solution-Processed Organic Light-Emitting Diode

Enhanced Hole Injection in a Bilayer Vacuum-Deposited Organic Light-Emitting Device Using a P-Type Doped Silicon Anode

Enhanced Electron Current in Inverted Organic Light Emitting Diodes with an N-Doped Electron Transport Layer Adopting High and Low Doping Levels

Enhanced Hole Injection Characteristics of a Top Emission Organic Light-Emitting Diode with Pure Aluminum Anode

Interfacial Charge Transfer Study of Hexacarbonitrile-Based Intermediate Connecter in Blue Tandem Organic Light-Emitting Diodes

Role of ${\rm Fe}_{3}{\rm O}_{4}$ As a $p$ -Dopant in Improving the Hole Injection and Transport of Organic Light-Emitting Devices

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Enhancing the hole injection and transporting of organic light-emitting diodes by utilizing gradient doping

Influence of PVK:NPB Hole Transporting Layer on Organic Light-Emitting Devices Characteristics

Improving the Performance of OLEDs by Using a Low-Temperature-evaporable N-Dopant and a High-Mobility Electron Transport Host.

F_(16)CuPc-Doped NPB as Hole Injection Layer in Organic Light-Emitting Diodes

Influence of Different Doping-Sites on the Performance of Double-Layer Heterojuction OLEDs

The combination of two p-doped layers for improving the hole current of organic light-emitting diodes

High Performance Organic Light-emitting Devices with a New Kind of Hole Injection Layer Material

Solution-processed P-Doped Hole-Transport Layer and Its Application in Organic Light-Emitting Diodes

Photoconductive Cathode Interlayer for Enhanced Electron Injection in Inverted Polymer Light-Emitting Diodes.