Abstract:5,6,11,12-tetraphenylnaphthacene (rubrene) exhibits resonant energy properties (ES1,rub≈2ET1,rub), resulting in rubrene-based OLED devices that undergo singlet fission (STT) process at room temperature. This unique process gives rise to a distinct magneto-electroluminescence (MEL) profile, differing significantly from the typical intersystem crossing (ISC) process. Therefore, toward investigate charge generation and separation in the interconnector, and the mechanism of charge transport in tandem OLEDs at room temperature using MEL tools. This paper fabricates tandem OLEDs composed of green (Alq3) and yellow (Alq3:rubrene) electroluminescence (EL) units using different interconnector. The results showed that all devices exhibited significant rubrene emission, but MEL didn't show an STT process with increasing magnetic field, but rather a triplet-triplet annihilation (TTA) process. Because of direct carrier trapping (DCT) in doped EL units, which hinders the transport of rubrene trapped charges, resulting in an extension of the triplet exciton (T1, rub) lifetime. Thus, the increased T1, rub concentration causes TTA occur at room temperature, causing the rapid decrease of MEL in all devices under high magnetic fields. In devices with only TTA process, the TTA increases with the increasing current. Therefore, the high magnetic field of devices A~C is only related to TTA. The high magnetic field TTA of the device D in Alq3/HAT-CN interconnector regardless of current. This is because the two EL units in the device emission together, resulting in the triplet-charge annihilation (TQA) process of Alq3 in the high magnetic field of the MEL. Furthermore, the MEL rapid increase of low magnetic field in all devices is caused by ISC between Alq3 polaron pairs. The throughout process involves the Förster and Dexter energy transfer (i.e. FET and DET). This article not only novel insights into charge generation and separation in the interconnector, enhancing our understanding of the microscopic mechanisms in tandem OLED devices.

Interfacial Charge Transfer Study of Hexacarbonitrile-Based Intermediate Connecter in Blue Tandem Organic Light-Emitting Diodes

Origin of Enhanced Hole Injection in Organic Light-Emitting Diodes with an Electron-Acceptor Doping Layer: P-Type Doping or Interfacial Diffusion?

Properties of Highly Efficient Charge Generation and Transport of Multialternating Organic Heterojunctions and Its Application in Organic Light-Emitting Diodes

High Efficiency Organic Light-Emitting Diodes Based on HAT-CN/TAPC Heterojunction Charge Generation Layer As Charge Injectors

Charge Transport Dependent High Open Circuit Voltage Tandem Organic Photovoltaic Cells with Low Temperature Deposited HATCN-based Charge Recombination Layers.

Efficient inverted organic light-emitting devices using a charge-generation unit as electron-injection layers

Highly Efficient Charge Generation and Injection in HAT-CN/TAPC Heterojunction for High Efficiency Tandem Organic Light-Emitting Diodes

Copper hexadecafluorophthalocyanine and copper phthalocyanine as a pure organic connecting unit in blue tandem organic light-emitting devices

C-70/C-70:Pentacene/Pentacene Organic Heterojunction As the Connecting Layer for High Performance Tandem Organic Light-Emitting Diodes: Mechanism Investigation of Electron Injection and Transport

Through-space charge transfer hexaarylbenzene dendrimers with thermally activated delayed fluorescence and aggregation-induced emission for efficient solution-processed OLEDs

Exploring charge generation and separation in tandem organic light-emitting diodes based on magneto-electroluminescence

High-efficiency Blue-Emitting Organic Light-Emitting Devices with 4, 4′, 4″-Tris(n-carbazolyl)-triphenylamine As the Hole/exciton-Blocking Layer

Highly Efficient Charge Generation and Electron Injection of M-Mtdata/m-mtdata:Hat-cn/hat-cn Organic Heterojunction on ITO Cathode for High Efficiency Inverted White Organic Light-Emitting Diodes

Organic heterojunctions as a charge generation layer in tandem organic light-emitting diodes: The effect of interfacial energy level and charge carrier mobility

Theoretical Study of the Electronic Structure and Properties of Alternating Donor-Acceptor Couples of Carbazole-Based Compounds for Advanced Organic Light-Emitting Diodes (OLED)

The Charge Generation Layer Incorporating Two P-Doped Hole Transport Layers for Improving the Performance of Tandem Organic Light Emitting Diodes

Charge injection engineering at organic/inorganic heterointerfaces for high-efficiency and fast-response perovskite light-emitting diodes

Investigation on the Mechanism of Charge Generation in Organic Heterojunctions: Analysis of I–V and C–V Characteristics

C70/Pentacene Organic Heterojunction As Charge Generator to Realize Highly Efficient Charge Carrier Injection in Organic Light‐Emitting Diodes: Performance and Mechanism Analysis

Tandem organic light-emitting diodes with KBH4 doped 9,10-bis(3-(pyridin-3-yl)phenyl) anthracene connected to the charge generation layer.

An Efficient Blue Organic Light Emitting Structure