Abstract:Carbon nanotubes (CNTs) [1] are one of the most exciting new materials, which possess excellent mechanical properties as well as thermal and electrical characteristics.The Young's modules of CNTs have an order of 1TPa [2, 3], which is much higher than that of the glass fibers (70GP) and most of the other material.Direct measurement on individual nanotubes using atomic force microscopy shows that CNTs can accommodate extreme deformation without fracture [4].Besides, CNTs are excellent conductors and possess high thermal conductivity.Many of the remarkable properties of CNTs are established well now [5][6][7][8], and their exploitation in a wide range of applications forms a major part of current research and development efforts [9,10].One of the challenges is to tackle the problem of manipulating CNTs, individually or collectively, to produce a particular arrangement needed for a given application.Moreover, if CNTs are be combined with metal materials to form composites, it is generally important to develop processing methods that disperses the CNTs homogeneously in the metallic matrix However, it is difficult to make CNTs dispersed uniformly in the metal-matrix.According to Dujardin's report [11], the pure metals would not easily wet the surface of CNTs for their surface tension out of a cut-off limit between 100 and 200mN/m.Therefore, traditional techniques such as powder metallurgic process would bring formidable technical hurdles to prepare high quality metal matrix CNTs composites, which ascribed to the low strength interfacial adhesion [12,13].CNT composite electroplating (CCE) is one of the most important techniques for preparing CNT composite films, because no melting and solidification of metal matrix are induced.The interest in the CCE is driven not only by its applicability to a great variety of metal materials but also by its simplicity.CCE is a cost-effective method usually requiring simple equipment as well as being amenable to scaling-up to large dimensions.In addition, the CCE can be integrated with the micro-electro-mechanical systems (MEMS) [14].The metal matrix CNTs composite films can be processed to be various micro-scale structures for MEMS devices such as field emission cathodes and electronic contacts [15]. www.intechopen.comCarbon Nanotubes -From Research to Applications 82In this study, we consider the following contents including preparation of metal/CNT composite using CCE (Section 2), Fabrication of Ni-matrix CNT field emitters using CCE (Section3), Cu/ CNT contact material prepared by CCE (Section 4) and CNT field emission micro-cathode arrays fabrication (Section 5).Finally, the potential applications of the resulting CNT structures and the scope for future work are highlighted in Sections6 and 7.

Microstructuring of Carbon Nanotubes-Nickel Nanocomposite.

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Fabrication and mechanical property of carbon nanotube/metal composites

Investigation of the microstructure and tribological properties of CNTs/Ni composites prepared by electrodeposition

Research of Carbon Nanotubes with Electroless Plating of Nickel

Properties of Carbon Nano-tubes/Magnesiuum Matrix Composite by Casting

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Microwave Sintering Carbon Nanotube/Ni0.5zn0.5fe2o4 Composites And Their Electromagnetic Performance

Ultrasonic spray preparation of chemical Ni-plating carbon nanotubes and microwave absorbing properties

Carbon Nanotubes with Nickel-Cobalt Alloy Coating

Fabrication of CNT-carbon composite microstructures using Si micromolding and pyrolysis

Nanostructuring enforced sandwich-tubular CNT-Cu interconnects

Effects of Single-walled Carbon Nanotubes with Ni Layers on Microstructure of Magnesium-matrix Composites

Regulating microstructure, mechanical properties and electrochemical characteristic of 2024-CNTs aluminum composites via decorating nano Ni on the surface of CNTs

Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content

Synthesis and Characterization of Nanoparticulate Strengthened Nickel Microcomponents

CNTs/Cu-Ti Composites Fabrication Through the Synergistic Reinforcement of CNTs and in Situ Generated Nano-Tic Particles

Carbon Nanotube Induced Microstructural Characteristics in Powder Metallurgy Al Matrix Composites and Their Effects on Mechanical and Conductive Properties

Research and Application of CNT Composite Electroplating