Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Microscopic Lithography with Pixelate Diffraction of A Digital Micro-Mirror Device for Micro-Lens Fabrication

Diffraction Phase Microscopy Realized with an Automatic Digital Pinhole

Speckle-free Laser Projection Structured Illumination Microscopy Based on a Digital Micromirror Device

Light and Matter Co-Confined Multi-Photon Lithography

Quantitative Phase Imaging Based on Wavefront Correction of a Digital Micromirror Device

High-Resolution Dmd-Fpm System Based On Ring Pattern Phase Retrieval Algorithm

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Direct write of microlens array using digital projection photopolymerization

Fast Fabrication of Large-Area Two-Dimensional Micro/Nanostructure by Femtosecond Laser

Direct Laser Writing Breaking Diffraction Barrier Based on Two-Focus Parallel Peripheral-Photoinhibition Lithography

Spatial Light Modulating Characters of Digital Micro Mirror Device (DMD) at Laser Illumination

Parallel two-photon lithography achieving uniform sub-200 nm features with thousands of individually controlled foci

Research On A New Approach For The Fabrication Of Diffractive Optical Elements By Means Of Rotating Digital Mask

Microscope Projection Photolithography Based on Liquid Crystal Microdisplay

Diffraction Characteristics of a Digital Micromirror Device for Computer Holography Based on an Accurate Three-Dimensional Phase Model

Digital Micromirror Device-Based Common-Path Quantitative Phase Imaging

Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects With Micro-Textures

Fabrication of Multifocal Microlens Array by One Step Exposure Process

Digital inverse patterning solutions for fabrication of high-fidelity microstructures in spatial light modulator (SLM)-based projection lithography

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

Optical microlithography on oblique and multiplane surfaces using diffractive phase masks