Abstract:A method for the in vivo determination of the isocenter dose, Diso, and mid-plane dose, Dm, using the transmitted signal St measured by 25 central pixels of an aSi-based EPID is here reported. The method has been applied to check the conformal radiotherapy of pelvic tumors and supplies accurate in vivo dosimetry avoiding many of the disadvantages associated with the use of two diode detectors (at the entrance and exit of the patient) as their periodic recalibration and their positioning. Irradiating water-equivalent phantoms of different thicknesses, a set of correlation functions F(w, l) were obtained by the ratio between St and Dm as a function of the phantom thickness, w, for a different field width, l. For the in vivo determination of Diso and Dm values, the water-equivalent thickness of the patients (along the beam central axis) was evaluated by means of the treatment planning system that uses CT scans calibrated in terms of the electron densities. The Diso and Dm values experimentally determined were compared with the stated doses D(iso,TPS) and D(m,TPS), determined by the treatment planning system for ten pelvic treatments. In particular, for each treatment four fields were checked in six fractions. In these conditions the agreement between the in vivo dosimetry and stated doses at the isocenter point were within 3%. Comparing the 480 dose values obtained in this work with those obtained for 30 patients tested with a similar method, which made use of a small ion-chamber positioned on the EPIDs to obtain the transmitted signal, a similar agreement was observed. The method here proposed is very practical and can be applied in every treatment fraction, supplying useful information about eventual patient dose variations due to the incorrect application of the quality assurance program based on the check of patient setup, machine setting, and calculations.

Thermal conductivity of a single Bi₀.₅Sb₁.₅Te₃ single-crystalline nanowire.

Thermoelectric Properties of an Individual Suspended Single-Crystalline Sb2Se3 Nanowire

Thermal Transport along Bi2te3 Topological Insulator Nanowires

Structure and thermophysical properties of single-wall Si nanotubes

On the Rayleigh–Taylor instability of radio bubbles in galaxy clusters

Thermal Conductivity of Three-Dimensional Nanostructured Bi85sb15 Solid Solution

A T-type Method for Characterization of the Thermoelectric Performance of an Individual Free-Standing Single Crystal Bi2S3 Nanowire.

Fabrication and Temperature Dependence of the Resistance of Single-Crystalline Bi Nanowires

Thermoelectric Characteristics of A Single-Crystalline Topological Insulator Bi2Se3 Nanowire

Semimetal to semiconductor transition in $\text{Bi}/\text{TiO}_{2}$ core/shell nanowires

In vivo dosimetry by an aSi-based EPID.

Electro-transport studies of electrodeposited (Bi<sub>1−<i>x</i></sub>Sb<sub><i>x</i></sub>)<sub>2</sub>Te<sub>3</sub> nanowires

Thermal conductivity for p-(Bi, Sb)$_{2}$Te$_{3}$ films of topological insulators

Templating Synthesis Of Uniform Bi2te3 Nanowires With High Aspect Ratio In Triethylene Glycol (Teg) And Their Thermoelectric Performance

Semimetal to semiconductor transition in Bi/TiO2 core/shell nanowires

Temperature dependence of electrical and thermal conduction in single silver nanowire

Electro-Transport Studies Of Electrodeposited (Bi(1-X)Sbx)(2)Te-3 Nanowires

C244 Thermal Conductivity of Individual SiC Nanowires

Effects of Hydrothermaly Synthesized Sb_2Se_3 Nanowires on the Thermoelectric Properties of Bi_2Te_3 Nanopowders

Enhanced Thermoelectric Properties of p-Type Bi 0.48 Sb 1.52 Te 3 /Sb 2 Te 3 Composite

Sn-doped bismuth telluride nanowires with high conductivity.