Abstract:Starch/polyvinyl alcohol (PVA) blended materials for using as a solid carbon source (SCS) were prepared by blending PVA and gelatinized starch in an aqueous solution system, in which PVA served as framework material and starch as carbon source. The optimization of starch content and temperature effects were investigated. It was indicated that higher denitrification efficiency could be achieved with more starch in the materials. The average specific denitrification rates were 0.93, 0.66, 0.37 and 0.36 mg/(g x day) corresponding to starch content of 70%, 60%, 40% and 30% respectively at 37 degrees C. The denitrification rates increased when operating temperature was raised from 23 degrees C to 30 degrees C and then 37 degrees C. The mechanism of carbon release was analyzed incorporating the experimental results of abiotic release in deionized water. The organic carbon was mainly hydrolyzed by microbes, and the biological release efficiencies were at the range of 89.2% to 96.0%. A long-term experiment with a continuous flow reactor with SCS material containing 70% starch was conducted to gain some experience for practical application. When the influent nitrate concentration was in the range of 35.2 to 39.1 mg/L, hydraulic retention time of 4 hr, and operating temperature of 30 degrees C, a nitrogen removal efficiency up to 94.6% and denitrification rate of 0.217 kg/(m3 x day) was achieved. The starch-based materials developed in this study can be used as a solid carbon source for tertiary nitrogen removal from secondary effluent.

[Effect of PLA/starch Slow-Release Carbon Source on Biological Denitrification].

Comparison of Denitrification Performances Using PLA/starch with Different Mass Ratios As Carbon Source

Carbon Release Behaviour of Polylactic Acid/starch-Based Solid Carbon and Its Influence on Biodenitrification

Biological Denitrification Using Starch/Polycaprolactone Blends As Carbon Source and Biofilm Support

Biological Denitrification Using Cross-Linked Starch/Pcl Blends As Solid Carbon Source and Biofilm Carrier

Enhanced denitrification using high-molecular-weight poly(lactic acid) blended with lactide as an effective carbon source

Biological denitrification in simulated groundwater using polybutylene succinate or polylactic acid-based composites as carbon source

Biological nitrate removal using wheat straw and PLA as substrate

[Denitrification Using Polylactic Acid As Solid Carbon Source].

Denitrification performance and microbial diversity in a packed-bed bioreactor using biodegradable polymer as carbon source and biofilm support.

Carbon Source Study on Biological Denitrification in Groundwater

Biological denitrification using polycaprolactone-peanut shell as slow-release carbon source treating drainage of municipal WWTP

Denitrification Using Starch/PCL Blends As Solid Carbon Source

Construction of Polylactic Acid Plastisphere Microbiota for Enhancing Nitrate Reduction in Denitrification Biofilters

Structure and Mass Transportation Model of Slow-Release Organic Carbon-Source Material for Groundwaterin Situdenitrification

Comparison of polycaprolactone and starch/polycaprolactone blends as carbon source for biological denitrification

Denitrification performance and microbial diversity using starch-polycaprolactone blends as external solid carbon source and biofilm carriers for advanced treatment

Effect of Different Carbon Sources on Denitrification Performance, Microbial Community Structure and Denitrification Genes.

Starch/polyvinyl Alcohol Blended Materials Used As Solid Carbon Source for Tertiary Denitrification of Secondary Effluent

Biological denitrification with a novel biodegradable polymer as carbon source and biofilm carrier

Structure and function of slow release organic carbon source in groundwater in-situ denitrification