Abstract:To solve the problem of unsatisfactory nitrogen removal effect and long start-up in slow sand filter (SSF), the powdery polycaprolactone (PCL) with different particle sizes (40 and 200 mesh) were added to the lab-scale SSFs. This study compared the two solid carbon sources release capacity and enhanced denitrification performance in each SSF, and revealed the inner mechanism by analyzing the physical and chemical characteristics of the biofilm. The results represented that PCL200 could release organic carbon up to 273.9 mg/L, which was much higher than PCL40 (121.2 mg/L). Since the higher organic carbon release and specific surface area, the PCL200 was conducive to the rapid start-up of the SSF and achieving a desired removal efficiency of NO3--N (> 95%) and TN (> 80%) at the early stage of operation. In addition, large amounts of biomass and extracellular polymeric substances (EPS) were detected in the PCL200 system. Spectroscopic characterization further revealed EPS from two SSFs expressed similar fluorescence peak locations but different intensities. Specifically, the aromatic and tryptophan protein-like substances were the main fractions in EPS, and more functional bonds (C-(C, H), C˭O, O-C-O) conducive to microbial flocculation were observed when adding PCL200. Furthermore, the high-throughput sequencing analysis showed the denitrifying bacteria almost accounted for 62.12% in the reactor with PCL200, and microorganisms in two SSFs were significant difference in amino acid and carbohydrate transportation and metabolism. Findings from this study would be valuable for enhancement of the denitrification and stability of SSF treating nitrogen-contaminated water bodies.

Denitrification Using Starch/PCL Blends As Solid Carbon Source

Biological Denitrification Using Cross-Linked Starch/Pcl Blends As Solid Carbon Source and Biofilm Carrier

Biological Denitrification Using Starch/Polycaprolactone Blends As Carbon Source and Biofilm Support

Comparison of polycaprolactone and starch/polycaprolactone blends as carbon source for biological denitrification

Insights into solid phase denitrification in wastewater tertiary treatment: the role of solid carbon source in carbon biodegradation and heterotrophic denitrification

Denitrification performance and microbial diversity in a packed-bed bioreactor using biodegradable polymer as carbon source and biofilm support.

Denitrification performance and microbial diversity using starch-polycaprolactone blends as external solid carbon source and biofilm carriers for advanced treatment

Denitrification performance and microbial diversity in a packed-bed bioreactor using PCL as carbon source and biofilm carrier

Poly (Epsilon-Caprolactone) As Substrate For Water Denitrification

Starch/polyvinyl Alcohol Blended Materials Used As Solid Carbon Source for Tertiary Denitrification of Secondary Effluent

Denitrification performance and biofilm characteristics using biodegradable polymers PCL as carriers and carbon source

Enhanced denitrification using high-molecular-weight poly(lactic acid) blended with lactide as an effective carbon source

Insights into the relationship between denitrification and organic carbon release of solid-phase denitrification systems: Mechanism and microbial characteristics

Denitrification performance, biofilm formation and microbial diversity during startup of slow sand filter using powdery polycaprolactone as solid carbon source

Nitrogen Removal Using Biodegradable Polymers As Carbon Source and Biofilm Carriers in a Moving Bed Biofilm Reactor

Influence mechanism of filling ratio on solid-phase denitrification with polycaprolactone as biofilm carrier

Comparison of Clay Ceramsite and Biodegradable Polymers as Carriers in Pack-bed Biofilm Reactor for Nitrate Removal

[Denitrification Using Polylactic Acid As Solid Carbon Source].

Biological denitrification using polycaprolactone-peanut shell as slow-release carbon source treating drainage of municipal WWTP

Denitrification performance using biodegradable polymer as carbon source to treat nitrified swine wastwater

Nitrate removal efficiency and bacterial community dynamics in denitrification processes using poly (L-lactic acid) as the solid substrate