Abstract:To solve the problem of unsatisfactory nitrogen removal effect and long start-up in slow sand filter (SSF), the powdery polycaprolactone (PCL) with different particle sizes (40 and 200 mesh) were added to the lab-scale SSFs. This study compared the two solid carbon sources release capacity and enhanced denitrification performance in each SSF, and revealed the inner mechanism by analyzing the physical and chemical characteristics of the biofilm. The results represented that PCL200 could release organic carbon up to 273.9 mg/L, which was much higher than PCL40 (121.2 mg/L). Since the higher organic carbon release and specific surface area, the PCL200 was conducive to the rapid start-up of the SSF and achieving a desired removal efficiency of NO3--N (> 95%) and TN (> 80%) at the early stage of operation. In addition, large amounts of biomass and extracellular polymeric substances (EPS) were detected in the PCL200 system. Spectroscopic characterization further revealed EPS from two SSFs expressed similar fluorescence peak locations but different intensities. Specifically, the aromatic and tryptophan protein-like substances were the main fractions in EPS, and more functional bonds (C-(C, H), C˭O, O-C-O) conducive to microbial flocculation were observed when adding PCL200. Furthermore, the high-throughput sequencing analysis showed the denitrifying bacteria almost accounted for 62.12% in the reactor with PCL200, and microorganisms in two SSFs were significant difference in amino acid and carbohydrate transportation and metabolism. Findings from this study would be valuable for enhancement of the denitrification and stability of SSF treating nitrogen-contaminated water bodies.

Comparison of polycaprolactone and starch/polycaprolactone blends as carbon source for biological denitrification

Biological Denitrification Using Starch/Polycaprolactone Blends As Carbon Source and Biofilm Support

Biological Denitrification Using Cross-Linked Starch/Pcl Blends As Solid Carbon Source and Biofilm Carrier

Denitrification Using Starch/PCL Blends As Solid Carbon Source

In Situ GRAFT COPOLYMERIZATION OF STARCH WITH LACTIC ACID

Denitrification performance and microbial diversity in a packed-bed bioreactor using biodegradable polymer as carbon source and biofilm support.

Denitrification performance and microbial diversity in a packed-bed bioreactor using PCL as carbon source and biofilm carrier

Denitrification performance and biofilm characteristics using biodegradable polymers PCL as carriers and carbon source

Poly (Epsilon-Caprolactone) As Substrate For Water Denitrification

Denitrification performance, biofilm formation and microbial diversity during startup of slow sand filter using powdery polycaprolactone as solid carbon source

Insights into solid phase denitrification in wastewater tertiary treatment: the role of solid carbon source in carbon biodegradation and heterotrophic denitrification

[Comparison of Polycaprolactone and Poly-3-hydroxybutyrate-co-3-hydroxyvalerate for Nitrogen Removal]

Comparative Study of Different Nitrogen-Containing Plasma Modifications Applied on 3D Porous PCL Scaffolds and 2D PCL Films

Comparison of Clay Ceramsite and Biodegradable Polymers as Carriers in Pack-bed Biofilm Reactor for Nitrate Removal

Influence mechanism of filling ratio on solid-phase denitrification with polycaprolactone as biofilm carrier

Denitrification performance using biodegradable polymer as carbon source to treat nitrified swine wastwater

Enhanced nitrogen removal of coal pyrolysis wastewater with low COD to nitrogen ratio by partial nitrification-denitrification bioprocess assisted with polycaprolactone

Nitrogen Removal Using Biodegradable Polymers As Carbon Source and Biofilm Carriers in a Moving Bed Biofilm Reactor

Advanced Nitrogen Removal Using Innovative Denitrification Biofilter with Sustained-Release Carbon Source Material

Comparison of Denitrification Performance and Microbial Diversity Using Starch/Polylactic Acid Blends and Ethanol As Electron Donor for Nitrate Removal

Denitrification performance and microbial diversity using starch-polycaprolactone blends as external solid carbon source and biofilm carriers for advanced treatment