Abstract:In recent years, there is a trend of low C/N ratio in municipal domestic wastewater, which results in serious problems for nitrogen removal from wastewater. The addition of an external soluble carbon source has been the usual procedure to achieve denitrification. However, the disadvantage of this treatment process is the need of a closed, rather sophisticated and costly process control as well as the risk of overdosing. Solid-phase denitrification using biodegradable polymers as biofilm carrier and carbon source was considered as an attractive alternative for biological denitrification. The start-up time of the novel process using PCL (polycaprolactone) as biofilm carrier and carbon source was comparable with that of conventional process using ceramsite as biofilm carrier and acetate as carbon source. Further, the solid-phase denitrification process showed higher nitrogen removal efficiency under shorter hydraulic retention time (HRT) and low carbon to nitrogen (C/N) ratio since the biofilm was firmly attached to the clear pores on the surface of PCL carriers and in this process bacteria that could degrade PCL carriers to obtain electron donor for denitrification was found. In addition, solid-phase denitrification process had a stronger resistance of shock loading than that in conventional process. This study revealed, for the first time, that the physical properties of the biodegradable polymer played a vital role in denitrification, and the different microbial compositions of the two processes was the main reason for the different denitrification performances under low C/N ratio.

Influence mechanism of filling ratio on solid-phase denitrification with polycaprolactone as biofilm carrier

Denitrification performance and biofilm characteristics using biodegradable polymers PCL as carriers and carbon source

The intrinsic relevance of nitrogen removal pathway to varying nitrate loading rate in a polycaprolactone-supported denitrification system

Poly (Epsilon-Caprolactone) As Substrate For Water Denitrification

Denitrification performance and microbial diversity in a packed-bed bioreactor using PCL as carbon source and biofilm carrier

Comparison of Clay Ceramsite and Biodegradable Polymers as Carriers in Pack-bed Biofilm Reactor for Nitrate Removal

Nitrogen Removal Using Biodegradable Polymers As Carbon Source and Biofilm Carriers in a Moving Bed Biofilm Reactor

Biological Denitrification Using Starch/Polycaprolactone Blends As Carbon Source and Biofilm Support

Advanced Nitrogen Removal Using Innovative Denitrification Biofilter with Sustained-Release Carbon Source Material

Enhanced nitrogen removal of coal pyrolysis wastewater with low COD to nitrogen ratio by partial nitrification-denitrification bioprocess assisted with polycaprolactone

Effect of N/P Ratio on Denitrification Efficiency of Three-dimensional Electrode/Biofilm Reactor

Denitrification performance and microbial diversity in a packed-bed bioreactor using biodegradable polymer as carbon source and biofilm support.

Nitrate removal efficiency and bacterial community dynamics in denitrification processes using poly (L-lactic acid) as the solid substrate

The metabolic patterns of the complete nitrates removal in the biofilm denitrification systems supported by polymer and water-soluble carbon sources as the electron donors

Acceleration of nitrogen removal performance in a biofilm reactor augmented with Pseudomonas sp. using polycaprolactone as carbon source for treating low carbon to nitrogen wastewater

Insights into solid phase denitrification in wastewater tertiary treatment: the role of solid carbon source in carbon biodegradation and heterotrophic denitrification

Biological Denitrification Using Cross-Linked Starch/Pcl Blends As Solid Carbon Source and Biofilm Carrier

Effect of hydraulic retention time on denitrification performance and microbial communities of solid-phase denitrifying reactors using polycaprolactone/corncob composite

Denitrification performance and microbial diversity using starch-polycaprolactone blends as external solid carbon source and biofilm carriers for advanced treatment

Enhanced denitrification using high-molecular-weight poly(lactic acid) blended with lactide as an effective carbon source

Nitrite accumulation and microbial behavior by seeding denitrifying phosphorus removal sludge for partial denitrification (PD): The effect of COD/NO3− ratio