Abstract:Monitoring the corrosion of steel rebars is paramount to ensuring the safety and serviceability of reinforced concrete (RC) structures. Conventional electro-chemical techniques can provide an overall estimate of the extent of corrosion. However, a detailed account of the extent of corrosion would help in understanding the residual strength of corroding RC structures. A passive wave-based technique such as acoustic emissions can identify the location of corrosion but always requires the presence of transducers on the structure. In active wave-based techniques, the structure is excited through a pulse excitation and their subsequent response to this excitation is measured. Thus, for active techniques, the transducers need not always be present in the structure. In guided wave ultrasonics, the excitation pulse is imparted through a waveguide to determine the state of corrosion. This technique relies on parameters such as time of flight or attenuation of the incident signal to predict the state of corrosion. These parameters can be susceptible to uncertainties in the transducer of ultrasonic coupling. In the present study, concrete specimens with embedded steel bars have been subjected to accelerated corrosion. They have been monitored with a combination of active and passive techniques. The received signals are analyzed through a modified S-Transform-based time-frequency approach to obtain a range of modes that propagate through the specimen. The changes in the modal composition of the guided wave signals due to corrosion are parameterized and correlated to various stages of corrosion. A holistic understanding of the stages of corrosion is developed by the inclusion of acoustic emission hits to guided wave parameters. Based on the Guided Wave Ultrasonics and acoustic emission parameters, corrosion has been classified into Initiation, Intermediate, and Advanced. Subsequently, destructive tests have been performed to measure the residual strength of the corroded bars. Thus, this paper presents a novel proof of concept study for monitoring corrosion with Guided Wave Ultrasonics and acoustic emissions.

Numerical Simulation of Monitoring Corrosion in Reinforced Concrete Based on Ultrasonic Guided Waves

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

State-of-art of corrosion-induced cracking of reinforced concrete structures

Point Cloud-Based Finite Element Model for Interaction of Ultrasonic Guided Waves with Non-uniform Corrosion in Reinforced Concrete

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Corrosion damage detection in reinforced concrete using Rayleigh wave-based method

Numerical-based method for calculating reinforcement corrosion at concrete cover cracking due to corrosion

Multimodal Monitoring of Corrosion in Reinforced Concrete for Effective Lifecycle Management of Built Facilities

Study on the Real-Time Dynamic Monitoring of Corrosion Rate of Reinforcement in Carbonation Environment

SIMULATED RESEARCH ON CORROSION OF REINFORCEMENT IN CONCRETE UNDER CHLORIDE ENVIRONMENT

Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Characterisation of corrosion-induced crack in concrete using ultrasonic diffuse coda wave

A layer discrete particle based soft contact model in corroded rebar monitoring using linear and nonlinear ultrasonic guided waves

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

Characterization of Corrosion-Induced Fracture in Reinforced Concrete Beams Using Electrical Potential, Ultrasound and Low-Frequency Vibration