Abstract:A low-noise Brillouin random fiber laser (BRFL) with stabilized lasing output and narrow linewidth is proposed and demonstrated experimentally. Stimulated Brillouin scattering and Rayleigh scattering are exploited to work as the gain and random distributed feedback mechanisms, respectively. A simple unpumped Erbium-doped fiber (EDF) loop structure which consists of a section of EDF and an optical coupler is introduced into the BRFL cavity, forming a saturable absorption ring (SAR). When light with proper intensity is incident into the SAR, a dynamic fiber grating (DFG) can be built up to work as a narrow-bandwidth filter with the ability of auto-tracking the center frequency. The SAR can effectively filter out dense random longitudinal modes and suppress multi-mode resonances and frequency jitters by restricting the mode-competition-induced mode hopping within a limited frequency range of ∼ 1 MHz and auto-tracking the center frequency of light in the cavity, simultaneously. Thus, the output of BRFL with SAR is much more stabilized than existing free-running BRFLs. In the experiment, a stable lasing output with an ultra-narrow linewidth (less than2kHz) is obtained from the proposed BRFL. The measured relative intensity noise and frequency noise demonstrate that the noise level of the proposed laser is significantly lower than that of the free-running BRFLs. This proposed technique not only provides a solution to the dilemma of previously reported BRFLs with severe lasing instabilities, but also makes a step towards the development of practical and reliable BRFLs. This high-quality laser source with advantages of high stability, low cost, low threshold power, high coherence, narrow linewidth, and low noise can find useful applications in coherent optical detection, high-resolution spectrometers, microwave photonics, and optical sensing fields.

High signal-to-noise ratio, single-frequency 2 μm Brillouin fiber laser.

Watt-level Ultrahigh-Optical Signal-to-noise Ratio Single-Longitudinal-mode Tunable Brillouin Fiber Laser.

High-Efficiency Hybrid Brillouin/Ytterbium Fiber Laser

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Ultra-Broadband Supercontinuum Generation and Characterization of Brillouin/Raman Fiber Laser.

A polarization sensitive self-excited multi-wavelength Brillouin-Erbium fiber laser without filtering devices

Low-Threshold and Sub-kHz-Linewidth Brillouin Laser Based on Chalcogenide Fiber at 2 $\mu$m

Over-20-octaves-bandwidth Ultralow-Intensity-noise 1064-Nm Single-Frequency Fiber Laser Based on a Comprehensive All-Optical Technique

High OSNR Watt-Level Single-Frequency One-Stage PM-MOPA Fiber Laser at 1083 Nm

Brillouin Laser Based on High <i>Q</i> Fiber Ring Resonator

Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920 nm

24 kW 1045 nm narrow-spectral-width monolithic single-mode CW fiber laser by using an FBG-based MOPA configuration

Low-noise Brillouin random fiber laser with Auto-tracking dynamic fiber grating based on a saturable absorption ring

kHz pulse generation with Brillouin erbium fiber laser

Tunable and narrow linewidth multi-wavelength Brillouin-erbium fiber laser using dual-wavelength pumping

Single-frequency Brillouin lasing based on a birefringent fiber Fabry–Pérot cavity

Kilohertz-Linewidth Brillouin Photonic Crystal Fiber Laser With Non-Resonance Pumping Configuration

Single-longitudinal-mode narrow linewidth broadband tunable Brillouin random laser including dispersion compensation fibers

Stabilized Narrow-Linewidth Brillouin Random Fiber Laser With a Double-Coupler Fiber Ring Resonator

A Single-Frequency Narrow-Linewidth Fiber Laser with PM Fiber Saturable Absorber

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity