Abstract:A single longitudinal mode (SLM) parity-time (PT) symmetric Brillouin fiber laser (BFL) based on z-cut lithium niobate phase modulator (LN-PM) Sagnac loop with Hz level linewidth is proposed and experimentally verified. A 10 km single-mode fiber provide SBS gain, while an LN-PM Sagnac loop consisting of an LN-PM and two polarization controllers (PCs) is used to achieve PT symmetry. Two mutually linked feedback loops supporting orthogonally polarized light are created by utilizing inherent birefringence of LN waveguide from LN-PM without electrical signal modulation. One of the feedback loops experiences gain in a clockwise direction and the other loss in a counterclockwise direction. The polarization state of the stokes injected into the LN-PM is controlled by adjusting the PC, and SLM BFL can be achieved when the gain and loss are well matched and exceed the coupling coefficient to break the PT symmetry. Compared with existing BFL studies, this design does not call for frequency matching of several composite cavity structures or precise control of ultra-narrow bandwidth bandpass filters. In addition, a frequency-locking system based on Pound-Drever-Hall technology is employed to lessen the instability and external disturbances brought on by the ring cavity. In the experiment, the linewidth of PT symmetry BFL based on LN-PM Sagnac loop is 3.85 Hz, according to the measured linewidth of 77 Hz at the 20 dB power point. A 65 dB optical signal-to-noise ratio and a 43 dB maximum side mode suppression ratio are measured. Furthermore, the PT symmetry BFL's wavelength is tuned between 1550 and 1550.41 nm.

Watt-level Ultrahigh-Optical Signal-to-noise Ratio Single-Longitudinal-mode Tunable Brillouin Fiber Laser.

High signal-to-noise ratio, single-frequency 2 μm Brillouin fiber laser.

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Single-longitudinal-mode narrow linewidth broadband tunable Brillouin random laser including dispersion compensation fibers

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Single Longitudinal Mode Parity-Time Symmetric Brillouin Fiber Laser Based on Lithium Niobate Phase Modulator Sagnac Loop

Fiber-Integrated Reversibly Wavelength-Tunable Nanowire Laser Based on Nanocavity Mode Coupling.

Uniform Amplitude Multi-Wavelength Single-Longitudinal-Mode Brillouin-Erbium Fiber Lasers

High-Efficiency Hybrid Brillouin/Ytterbium Fiber Laser

Tunable Single-Longitudinal-mode Ytterbium All Fiber Laser with Saturable-Absorber-based Auto-Tracking Filter

Sinlge-frequency fiber laser with tunable linewidth by optical self-injection

Tunable Self-Seeded Multiwavelength Brillouin-Erbium Fiber Laser with Enhanced Power Efficiency.

60-nm-Wide Tunable Single-Longitudinal-Mode Ytterbium Fiber Laser With Passive Multiple-Ring Cavity

Single Longitudinal Mode Narrow Linewidth Thulium-Doped Fiber Laser Based on a Eye-Shaped Dual-Ring Filter

High-Power Single-Longitudinal-Mode Fiber Laser with a Ring Fabry–PÉrot Resonator and a Saturable Absorber

C-band 41-wavelength-switchable single-longitudinal-mode fiber laser with sub-kHz linewidth and high stability using a wide-band chirped Moiré fiber Bragg grating

24 kW 1045 nm narrow-spectral-width monolithic single-mode CW fiber laser by using an FBG-based MOPA configuration

Kilohertz-Linewidth Brillouin Photonic Crystal Fiber Laser With Non-Resonance Pumping Configuration

Widely Wavelength-Tunable High Power Single-Longitudinal-Mode Fiber Laser in Mid-Infrared Waveband

Single-longitudinal-mode Brillouin random fiber laser with high linewidth–compression ratio and laser efficiency based on distributed intrinsic feedback mechanism