Abstract:Optical surface wave excited by nanocoatings has enabled fiber-optic sensors with high sensitivity to the change in external environment generally characterized by bulk refractive index (RI). Nonetheless, this sensitive response inevitably suffers from the contamination of surface-localized binding events. Herein, we proposed and demonstrated a miniaturized fiber-tip leaky mode resonance ($ {\rm {L^{e}MR}}$) sensor capable of unambiguously discriminating bulk and surface RI changes from a theoretical perspective. The fiber-tip $ {\rm {L^{e}MR}}$ sensor consists of a multi-mode fiber tip coated with $ \mathrm{{TiO_{2}}}$ thin film on which a surface-localized binding layer thinner than $ 20 \, \rm nm$ was set equivalent to the change of surface RI. The operation principle was obtained, with the analyses revealing that several fiber-tip leaky modes can be excited with fiber core mode and flexibly tuned by simply altering the thickness of $ \mathrm{{TiO_{2}}}$ thin film, which hence generates non-polarized fiber-tip $ {\rm {L^{e}MRs}}$ identified by the signature of attenuation maxima in reflection spectrum of the fiber-tip probe. These fiber-tip $ {\rm {L^{e}MRs}}$ present a sensitive linear intensity response (and wavelength shift) to the change in bulk RI (and surface RI), which is considerably feasible for distinctly discriminating bulk and surface RI changes. The results highlight that both the highest bulk sensitivity up to $ 58.5 \, \mathrm{{dB/RIU}}$ in the RI range of $ 1.315 \sim 1.355$ and the highest surface sensitivity up to $ 0.595 \, nm/nm$, combined with the smallest cross interference between them, can be attained simultaneously with a single fiber-tip $ {\rm {L^{e}MR}}$ and without the need of reference channels, which could enable the development of ultra-compact lab-on-tip optrodes, a pathway of the lab-on-fiber roadmap.

Tuning Response Range of a Transmission-Based Fiber-Optic Refractometer Through LP₁₁ Mode.

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

Intensity-Modulated Refractometer with Long-Period Fiber Gratings Near Turn-Around Point for Low Refractive Index Detection

Tunable Mode Coupler in the Microfluidic Channel for the Fiber Optics Refractive Index Sensor

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

Ultrasensitive and Wide-Measuring-Range Refractive Index Sensor with Optical Path Length-Tunable Vernier Effect

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

High Sensitivity Optical Fiber Mach–Zehnder Refractive Index Sensor Based on Waist-Enlarged Bitaper

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Refractive Index Sensing Characteristics of Long-Period Fiber Gratings Near Dispersion Turning Points at 2 Μm Waveband

Discriminating Bulk and Surface Refractive Index Changes With Fiber-Tip Leaky Mode Resonance

Bent optical fiber taper for refractive index detection with a high sensitivity

Novel Intensity-demodulated Fiber-optic Refractive Index Sensor Based on Splicing Point Tapered Fiber

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Refractive Index Sensing Based on Mach-Zehnder Interferometer Formed by Three Cascaded Single-Mode Fiber Tapers

Fiber Optic Refractometer Based on Leaky-Mode Interference of Bent Fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Liquid Refractive Index Sensors Using Resonant Optical Tunneling Effect for Ultra-High Sensitivity

Demodulation Method for Tilted Fiber Bragg Grating Refractometer with High Sensitivity