Abstract:Optical surface wave excited by nanocoatings has enabled fiber-optic sensors with high sensitivity to the change in external environment generally characterized by bulk refractive index (RI). Nonetheless, this sensitive response inevitably suffers from the contamination of surface-localized binding events. Herein, we proposed and demonstrated a miniaturized fiber-tip leaky mode resonance ($ {\rm {L^{e}MR}}$) sensor capable of unambiguously discriminating bulk and surface RI changes from a theoretical perspective. The fiber-tip $ {\rm {L^{e}MR}}$ sensor consists of a multi-mode fiber tip coated with $ \mathrm{{TiO_{2}}}$ thin film on which a surface-localized binding layer thinner than $ 20 \, \rm nm$ was set equivalent to the change of surface RI. The operation principle was obtained, with the analyses revealing that several fiber-tip leaky modes can be excited with fiber core mode and flexibly tuned by simply altering the thickness of $ \mathrm{{TiO_{2}}}$ thin film, which hence generates non-polarized fiber-tip $ {\rm {L^{e}MRs}}$ identified by the signature of attenuation maxima in reflection spectrum of the fiber-tip probe. These fiber-tip $ {\rm {L^{e}MRs}}$ present a sensitive linear intensity response (and wavelength shift) to the change in bulk RI (and surface RI), which is considerably feasible for distinctly discriminating bulk and surface RI changes. The results highlight that both the highest bulk sensitivity up to $ 58.5 \, \mathrm{{dB/RIU}}$ in the RI range of $ 1.315 \sim 1.355$ and the highest surface sensitivity up to $ 0.595 \, nm/nm$, combined with the smallest cross interference between them, can be attained simultaneously with a single fiber-tip $ {\rm {L^{e}MR}}$ and without the need of reference channels, which could enable the development of ultra-compact lab-on-tip optrodes, a pathway of the lab-on-fiber roadmap.

Discriminating Bulk and Surface Refractive Index Changes With Fiber-Tip Leaky Mode Resonance

Single mode fiber-tip leaky mode resonance: New opportunity for unveiling bulk and surface characteristics

Laser-Machined Miniature Fiber-Optic Refractive-Index Sensor Tip

Liquid Refractive Index Sensors Using Resonant Optical Tunneling Effect for Ultra-High Sensitivity

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper

Sensitivity-Enhanced RI Sensor Based on Cascaded Microfiber Mach–Zehnder Interferometers Near the Dispersion Turning Point With Vernier Effect

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

V-shaped Micro-Structure Optical Fiber Surface Plasmon Resonance Sensor for the Simultaneous Measurement of the Refractive Index and Temperature

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

A High-Sensitivity SPR Sensor Based on MMF-Tapered HCF-MMF Fiber Structure for Refractive Index Sensing

High-sensitivity refractive index sensor with tunable detection range based on dual-core resonance effect in gold-coated photonic crystal fibers

In-Line Fiber Fabry-Perot Refractive-Index Tip Sensor Based on Endlessly Photonic Crystal Fiber

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip