Abstract:A bolt-clamped type piezoelectric actuator, which could output rotary motions by using longitudinal-torsional hybrid vibration, was proposed and tested in this paper. The proposed actuator is mainly composed of a piezoelectric stack, a leftward bending longitudinal-torsional convertor (LBLTC), and a rightward bending longitudinal-torsional convertor (RBLTC). The piezoelectric stack, which is clamped between the LBLTC and RBLTC, is utilized to generate longitudinal vibration under exciting of a sinusoidal signal with a certain frequency. The two convertors transform part of the longitudinal vibration generated by the piezoelectric stack into the torsional vibration and generate elliptical motions at the ends of the driving tips, which can push the rotors to rotate step by step. The structure of the proposed actuator was designed, and the working principle for the rotary driving was analyzed. Then, modal, harmonic, and transient analyses were carried out by the finite element method to determine the structural dimensions of the convertors and verify the movement trajectories of the driving tips. Finally, a prototype was fabricated, and its vibration and output characteristics were tested. The experimental results indicated that the maximum no-load speed and maximum torque of the actuator were 342 r/min and 0.072 N·m under the preload of 11 N and the voltage of 300 V P-P . The simulation and experimental results verified the feasibility of the proposed actuator.

Note: A novel rotary actuator driven by only one piezoelectric actuator.

A piezoelectric-driven rotary actuator by means of inchworm motion

A Novel Piezo-Driven Linear-Rotary Inchworm Actuator

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Development of a Compact Impact Two-Degree-of-freedom Linear-Rotary Piezoelectric Motor Using One Piezoelectric Actuator.

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Design and experimental research of a novel inchworm type piezo-driven rotary actuator with the changeable clamping radius.

Design and Performance Testing of a New Type Piezoelectric Rotary Actuator

A Novel Inchworm Type Piezoelectric Rotary Actuator with Large Output Torque: Design, Analysis and Experimental Performance

Piezoelectric Inchworm Rotary Actuator with High Driving Torque and Self-Locking Ability

Design, Analysis and Experimental Performance of a Novel Stick-Slip Type Piezoelectric Rotary Actuator Based on Variable Force Couple Driving

A Novel Stick-Slip Type Rotary Piezoelectric Actuator

Design and Experimental Research of a Novel Inchworm Type Piezo-Driven Rotary Actuator with the Changeable Clamping Radius

A bio-inspired piezoelectric motor with simple structured asymmetric stator

Design and Experiments of a Novel Rotary Piezoelectric Actuator Using Longitudinal–Torsional Convertors

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

A Simplified Inchworm Rotary Piezoelectric Actuator Inspired by Finger Twist: Design, Modeling, and Experimental Evaluation.

A Novel Linear-Rotary Piezoelectric Positioning Stage Based on Surface's Rectangular Trajectory Driving

A novel stick-slip piezoelectric actuator is developed based on a parallelogram flexible drive mechanism to minimize shear force.

A 2-Dof Piezoelectric Inchworm Actuator for Precise Positioning