Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

A piezoelectric-driven rotary actuator by means of inchworm motion

A 2-Dof Piezoelectric Inchworm Actuator for Precise Positioning

A Single-Clamp Inchworm Actuator with Two Piezoelectric Stacks

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Development and test of a high speed pusher-type inchworm piezoelectric actuator with asymmetric driving and clamping configuration

Inchworm-like in-pipe micro-robot actuated by piezoelectric slotted cymbal

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

An Inchworm Type Piezoelectric Actuator Working in Resonant State

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

A novel stick-slip piezoelectric rotary actuator designed by employing a centrosymmetric flexure hinge mechanism

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed

A bio-inspired piezoelectric motor with simple structured asymmetric stator

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes

A bipedal cooperative drive method for the stick-slip piezoelectric actuator to achieve smooth motion

Design, analysis and experimental performance of a stepping type piezoelectric linear actuator based on compliant foot driving

A Novel Stick-Slip Type Rotary Piezoelectric Actuator

Design and Development of a Piezoelectric Linear Actuator for Smart Structures

A Stick-Slip/inchworm Hybrid Rotary Piezo Motor Based on a Symmetric Triangular Driving Mechanism

A Linear Piezoelectric Inchworm Motor Using Ultrasonic Clamping Vibrator