Abstract:Although the stick-slip piezoelectric linear actuators have been widely investigated, the design of stick-slip piezoelectric rotary actuators is rarely reported and the corresponding output performances could be further improved. In this study, by employing a centrosymmetric flexure hinge mechanism, a novel stick-slip piezoelectric rotary actuator was designed. Its structure and working processes were addressed in detail, and the main structural parameters of the centrosymmetric flexure hinge mechanism were designed by the finite-element method. After that, a prototype was fabricated and a series of experiments were performed to test its output performances. The experimental results showed that under various driving voltages, the actuator could output stable angular displacement, and with increase in the driving voltage, the angular speed tended to linearly increase. Under the driving voltage of 100 V and driving frequency of 600 Hz, the actuator reached a maximum angular speed of about 55 000 μrad s−1. The driving resolution of the actuator was 0.34 μrad, and the maximum vertical loading capacity and torque were tested to be 6 kg and 30 N · mm, respectively. In addition, both clockwise and anticlockwise rotations were realized by simply changing the direction of the driving voltage waveform, and furthermore, under the same experimental conditions, very similar output performances were achieved in clockwise and anticlockwise rotations. Compared with some previously reported stick-slip piezoelectric rotary actuators, it was confirmed that the vertical loading capacity and driving resolution of the designed actuator here had been improved, which would be beneficial to its practical application.

Design and Experiments of a Novel Rotary Piezoelectric Actuator Using Longitudinal–Torsional Convertors

A Rotary Piezoelectric Actuator Using Longitudinal and Bending Hybrid Transducer

Design and Performance Testing of a New Type Piezoelectric Rotary Actuator

Structural Design and Experimental Research of a Novel Piezoelectric Actuator

Design and Experimental Research of a New Type of Piezoelectric Rotary Actuator

Design and dynamic analysis of a novel compound bending hollow piezoelectric beam miniature rotary actuator

A Rotary Piezoelectric Actuator Using the Third and Fourth Bending Vibration Modes

Design, Analysis and Experimental Performance of a Novel Stick-Slip Type Piezoelectric Rotary Actuator Based on Variable Force Couple Driving

Development and Experiment Evaluation of an H-shape Linear Piezoelectric Actuator Operated in Stepping Mode

An Easily Fabricated Linear Piezoelectric Actuator Using Sandwich Longitudinal Vibrators With Four Driving Feet.

Design and Experimental Study of Cylindrical Non-contact Piezoelectric Actuator

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

A Novel Inchworm Type Piezoelectric Rotary Actuator with Large Output Torque: Design, Analysis and Experimental Performance

Design and Experimental Study of a Planar Piezoelectric Actuator with Resonant Actuation

Development of a Compact Impact Two-Degree-of-freedom Linear-Rotary Piezoelectric Motor Using One Piezoelectric Actuator.

A Novel Standing Wave Linear Piezoelectric Actuator Using the Longitudinal-Bending Coupling Mode

Development of a 3-DOF Rotary Piezoelectric Actuator with Compact Structure

Design and experimental research of a novel inchworm type piezo-driven rotary actuator with the changeable clamping radius.

A Novel Compact Bolted-Type Piezoelectric Actuator Excited by Two Excitation Methods: Design, Simulation, and Experimental Investigation

An I-Shape Linear Piezoelectric Actuator Using Resonant Type Longitudinal Vibration Transducers

A novel stick-slip piezoelectric rotary actuator designed by employing a centrosymmetric flexure hinge mechanism