Abstract:<p>Torsional piezoelectric actuators have been widely applied in many fields due to their specific vibration mode. However, the conventional torsional vibration piezoelectric actuators require circumferentially polarized piezoelectric ceramics or special structural designs, increasing manufacturing difficulty and processing costs, and seriously limiting their applications. In order to solve these problems, a novel excitation method of torsional vibration is proposed in this study through the arrangement of the regular piezoelectric ceramic plates polarized along their thickness direction, and then two surface-bonded type torsional piezoelectric actuators are constructed to stimulate the odd and even order torsional vibration modes, respectively. A novel transfer matrix model of describing the torsional vibration, which involves in the mechanical and electrical properties, is created first for the piezoelectric composite beam element. Then a general electromechanical coupling dynamic model is developed to reveal dynamic behaviors of the proposed surface-bonded type torsional piezoelectric actuators. In addition, the finite element simulation and experimental investigations are carried out to confirm the validation of the proposed excitation method of torsional vibration and to verify the correctness of the developed electromechanical coupling dynamic model. The comparisons showed that the results calculated by the developed theoretical model, simulated by the finite element method, and tested by the experiments matched well, indicating that the developed electromechanical coupling dynamic model is correctness and the excitation method of torsional vibration is effective. Finally, the output characteristics of the two proposed actuator prototypes are measured, further confirming the feasibility of the proposed torsional vibration excitation method.</p>

A Novel Compact Bolted-Type Piezoelectric Actuator Excited by Two Excitation Methods: Design, Simulation, and Experimental Investigation

Design and Experiments of a Novel Rotary Piezoelectric Actuator Using Longitudinal–Torsional Convertors

A Novel Piezoelectric Actuator with Two Operating Modes

A novel linear piezoelectric actuator with two working principles of standing and traveling wave vibration mode

A Novel U-shaped Stepping Linear Piezoelectric Actuator with Two Driving Feet and Low Motion Coupling: Design, Modeling and Experiments

A Rotary Piezoelectric Actuator Using Longitudinal and Bending Hybrid Transducer

Structural Design and Experimental Research of a Novel Piezoelectric Actuator

Excitation method and electromechanical coupling dynamic model of a novel torsional piezoelectric actuator

Analysis and Experiment Study of the Resonant Piezoelectric Actuator

An Easily Fabricated Linear Piezoelectric Actuator Using Sandwich Longitudinal Vibrators With Four Driving Feet.

Design and Experiments of a Single-Foot Linear Piezoelectric Actuator Operated in a Stepping Mode

Design and Locomotion Study of Stick-Slip Piezoelectric Actuator Using Two-Stage Flexible Hinge Structure

An Inchworm Type Piezoelectric Actuator Working in Resonant State

A Novel Type of Noncontact Linear Piezoelectric Actuator Modulated by Electromagnetic Field: Design and Experiment

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Design and experimental verification of a bolt-clamped piezoelectric actuator based on clamping and driving mechanism

Development of a Novel Piezoelectric Actuator Based on Stick–Slip Principle by Using Asymmetric Constraint

Novel Design, Analytical and Experimental Studies of a Piezoelectric Ultrasonic Linear Actuator Based on Binate Feet Driving

Improvement and miniaturization of a T-shaped linear piezoelectric actuator with single foot

A Novel Stick-Slip Piezoelectric Actuator Based on Two-Stage Flexible Hinge Structure.

A novel inchworm piezoelectric actuator using two-stage amplification mechanism with high speed: design, modeling, and experimental evaluation