Abstract:Although the stick-slip piezoelectric linear actuators have been widely investigated, the design of stick-slip piezoelectric rotary actuators is rarely reported and the corresponding output performances could be further improved. In this study, by employing a centrosymmetric flexure hinge mechanism, a novel stick-slip piezoelectric rotary actuator was designed. Its structure and working processes were addressed in detail, and the main structural parameters of the centrosymmetric flexure hinge mechanism were designed by the finite-element method. After that, a prototype was fabricated and a series of experiments were performed to test its output performances. The experimental results showed that under various driving voltages, the actuator could output stable angular displacement, and with increase in the driving voltage, the angular speed tended to linearly increase. Under the driving voltage of 100 V and driving frequency of 600 Hz, the actuator reached a maximum angular speed of about 55 000 μrad s−1. The driving resolution of the actuator was 0.34 μrad, and the maximum vertical loading capacity and torque were tested to be 6 kg and 30 N · mm, respectively. In addition, both clockwise and anticlockwise rotations were realized by simply changing the direction of the driving voltage waveform, and furthermore, under the same experimental conditions, very similar output performances were achieved in clockwise and anticlockwise rotations. Compared with some previously reported stick-slip piezoelectric rotary actuators, it was confirmed that the vertical loading capacity and driving resolution of the designed actuator here had been improved, which would be beneficial to its practical application.

Piezoelectric Inchworm Rotary Actuator with High Driving Torque and Self-Locking Ability

A piezoelectric-driven rotary actuator by means of inchworm motion

A Novel Inchworm Type Piezoelectric Rotary Actuator with Large Output Torque: Design, Analysis and Experimental Performance

A Novel Piezo-Driven Linear-Rotary Inchworm Actuator

Design and Experimental Research of a Novel Inchworm Type Piezo-Driven Rotary Actuator with the Changeable Clamping Radius

Design and experimental research of a novel inchworm type piezo-driven rotary actuator with the changeable clamping radius.

A 2-Dof Piezoelectric Inchworm Actuator for Precise Positioning

A Compact Inchworm Piezoelectric Actuator with High Speed: Design, Modeling, and Experimental Evaluation

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Development and Experiment Evaluation of a Compact Inchworm Piezoelectric Actuator Using Three-Jaw Type Clamping Mechanism

A High-Speed Inchworm Piezoelectric Actuator with Multi-Layer Flexible Clamping: Design, Modeling, and Experiments

A Simplified Inchworm Rotary Piezoelectric Actuator Inspired by Finger Twist: Design, Modeling, and Experimental Evaluation.

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A novel stick-slip piezoelectric rotary actuator designed by employing a centrosymmetric flexure hinge mechanism

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators

Development and test of a high speed pusher-type inchworm piezoelectric actuator with asymmetric driving and clamping configuration

A round-trip piezoelectric actuator with variable step and large displacement

A Self-Adapting Linear Inchworm Piezoelectric Actuator Based on a Permanent Magnets Clamping Structure

A Single-Clamp Inchworm Actuator with Two Piezoelectric Stacks

A Multipoint Regulated Inchworm Rotary Piezoelectric Actuator Inspired by Hula Hoop Motion