Abstract:A noncontact, color-band pyrometer, based on widely available, inexpensive digital imaging devices, such as commercial color cameras, and capable of pixel-by-pixel resolution of particle-surface temperature and emissivity is demonstrated and described. This diagnostic instrument is ideally suited to many combustion environments. The devices used in this method include color charge-coupled device (CCD), or complementary metal oxide semiconductor (CMOS) digital camera, or any other color-rendering camera. The color camera provides spectrally resolved light intensity data of the image, most commonly for three color bands (Red, Green, and Blue,). but in some cases for four or more bands or for a different set of colors. The CCD or CMOS sensor-mask combination has a specific spectral response curve for each of these color bands that spans the visible and often near infrared spectral range. A theory is developed, based on radiative heat transfer and camera responsivity that allows quantitative surface temperature distribution calculation, based on a photograph of an object it? emitted light. Particle surface temperature calculation is corrected by heat transfer analysis with reflection between the particle and reactor wall for particles located in furnace environments, but such corrections lead to useful results only when the particle temperature is near or below the wall temperatures. Wood particle-surface temperatures were measured with this color-band pyrometry during pyrolysis and combustion processes, which agree well with thermocouple measured data. Particle-surface temperature data simultaneously measured from three orthogonal directions were also mapped onto the surface of a computer generated 3-D (three-dimensional) particle model. (C) 2008 American Institute of Chemical Engineers AIChE J, 55: 243-255, 2009

Evaluation and Improvement in the Accuracy of a Charge-Coupled-device-based Pyrometer for Temperature Field Measurements of Continuous Casting Billets.

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Measurement Performance of an Optical CCD-based Pyrometer System

Improvements to the Three-Color Optical CCD-based Pyrometer System

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Two-color optical charge-coupled-device-based pyrometer using a two-peak filter.

Improved Monochromatic Pyrometry for Synchronous Measurement of Full-Field Temperature and Deformation

Theoretical Evaluation of Measurement Uncertainties of Two-Color Pyrometry Applied to Optical Diagnostics.

Research on numerical calculation of colorimetric temperature measuring method for high temperature flame image processing

Spectral Pyrometry for Practical Temperature Measurement in the TEM

Particle surface temperature measurements with multicolor band pyrometry

Combined use of blackbody and infrared radiation for accurate measurement of temperature field of aluminum alloys

Temperature-Automated Calibration Methods for a Large-Area Blackbody Radiation Source

Improvement to Two-color Temperature Measurement Based on Flame Image Processing Method

Temperature measurement of coal fired flame in the cement kiln by raw image processing

Measurement On The Surface Temperature Of Dispersed Chars In A Flat-Flame Burner Using Modified Rgb Pyrometry

RESEARCH ON TEMPERATURE FIELD MEASURING FOR COMBUSTION FLANCE BASED ON PLANE SURFACE ARRAY CCD

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Measurements of flame temperature distribution by the use of a colored array CCD (charge-coupled device) (I) the measurement of a two-dimensional projection temperature field

Calculation Errors of Flame Temperature Field Measurements Based on Color CCD

Temperature measurements using multicolor pyrometry in thermal radiation heating environments.