Abstract:A method to simultaneously measure two-dimensional temperature and emissivity distributions on high-temperature diffuse surfaces is developed using an auxiliary light source. The high-temperature diffuse surface is irradiated from the hemispherical space with the auxiliary light source switched “on” or “off.” Two images of the effective radiation intensity are obtained in quick succession for the two states to determine the temperature and emissivity distributions. The measurement method and uncertainty models show that the effect of the unknown emissivity on the accuracy of the temperature field measurement can be eliminated. The optical pyrometer is a color charge coupled device (CCD) sensor with a quartz lamp array used as the auxiliary light source to illustrate the measurement method. An oxidized W–Ni–Fe alloy sample is heated at high temperatures of 600–1000 °C by a 700 W induction-heating device. The distributions of the effective radiation intensities from the sample surface during the “on” and “off” states of the lamp array are measured in the three color channels (R, G, and B channels) to calculate the temperature and emissivity distributions. The temperature measurement uncertainties are less than 4 °C for a temperature range of 600–900 °C. The temperature measurements are experimentally validated by the thermocouple method only with a small temperature difference. The emissivities calculated from the three color channels are very close with a range of 0.855–0.957. The relative uncertainties in the emissivities for channels R and G are less than 2.0%, while the relative uncertainty for channel B data was higher at 2.8% and 7.5% due to lower measurement signals in channel B. This analysis may provide a useful method for measuring the temperatures of high-temperature diffuse surfaces by successfully compensating for the effects of unknown or changing emissivities.

Theoretical Evaluation of Measurement Uncertainties of Two-Color Pyrometry Applied to Optical Diagnostics.

Some Considerations of Pyrometry Optimization Based on Measurement Uncertainties

Measurement Performance of an Optical CCD-based Pyrometer System

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

Improvements to the Three-Color Optical CCD-based Pyrometer System

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Measurement uncertainties of multi-band pyrometry

Temperature measurements of diesel fuel combustion with multicolor pyrometry

Study of an Improved Two-Colour Method Integrated with the Emissivity Ratio Model and Its Application to Air- and Oxy-Fuel Flames in Industrial Furnaces

Synthetic Performance Evaluation System of Infrared Hybrid Optical System

Temperature measurements using multicolor pyrometry in thermal radiation heating environments.

Two-color optical charge-coupled-device-based pyrometer using a two-peak filter.

Optimization analysis of multi-band pyrometry

The Analysis of Optimization Criteria for Multi-Band Pyrometry

Refinement of the two-color pyrometry method for application in a direct injection diesel and natural gas compression-ignition engine

Measurements of flame temperature distribution by the use of a colored array CCD (charge-coupled device) (I) the measurement of a two-dimensional projection temperature field

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

The theoretical prediction analyses of the measurement range for multi-band pyrometry

Measurement On The Surface Temperature Of Dispersed Chars In A Flat-Flame Burner Using Modified Rgb Pyrometry

Particle surface temperature measurements with multicolor band pyrometry

Method for implementing thermodynamic temperature measurement based on color temperature meter