Abstract:We put forward an improved three-color measurement scheme with a color CCD sensor using the combination of effective wavelengths and blackbody calibrations. The process of effective wavelengths realizes the separation of the emissivity function from the measurement integral equation. This improved method not only effectively avoids errors arising from the traditional process adopting the basic wavelengths, but also simplifies the complex integral calculations. For a blackbody or graybody, the measurement performance of the pyrometer was experimentally investigated from the point of the temperature sensitivity. The results show that narrowing the spectrum bandwidth with different bandpass spectral filters may improve the temperature sensitivities. The spectrum adjustment not only makes the linear emissivity more suitable in the narrower waveband, but also reduces the numerical uncertainty of the effective wavelengths. For nongray objects, the effects of the numerical uncertainty of the effective wavelengths to measurements were quantificationally evaluated at different measurement conditions (different temperatures, emissivities, and spectrums). The results indicate that the reference values of 584, 555, and 511nm or 607, 560, and 506nm of the effective wavelengths are reasonable for the present system with the modified spectral response using Filter 1 or Filter 2. The maximum calculation errors arising from the reference effective wavelengths are less than 1.6%. In this paper, the technical realization steps of the improved method are also described. The measurement experiments of a metal sample in hot environments were carried out to further verify the applicability of this improved CCD-based pyrometer. The results agreed well with the spectrometer-based results.

Improvement to Two-color Temperature Measurement Based on Flame Image Processing Method

Study of an Improved Two-Colour Method Integrated with the Emissivity Ratio Model and Its Application to Air- and Oxy-Fuel Flames in Industrial Furnaces

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

Research on numerical calculation of colorimetric temperature measuring method for high temperature flame image processing

Measurements of flame temperature distribution by the use of a colored array CCD (charge-coupled device) (I) the measurement of a two-dimensional projection temperature field

RESEARCH ON TEMPERATURE FIELD MEASURING FOR COMBUSTION FLANCE BASED ON PLANE SURFACE ARRAY CCD

Measurement of Flame Temperature Distribution Using Array CCD (Ⅱ)- Three-dimensional Cross-section Temperature Field Measurement

Temperature Distribution of Combustion Flame in the Gasoline Engine by Means of Two-Color Method

Reconstructing Temperature and Particle Concentration Distribution Based on Flame Image

Temperature measurement of coal fired flame in the cement kiln by raw image processing

Simultaneous Measurements of Two-Dimensional Temperature and Particle Concentration Distribution from the Image of the Pulverized-Coal Flame

A NEW METHOD TO MEASURE NON-SYMMETRIC 3-D TEMPERATURE DISTRIBUTION OF A COAL FLAME

Model and Experiment for Three-Dimensional Temperature Measurement Based on Flame Image

APPLICATION OF COMBUSTION DIAGNOSIS AND TEMPERATURE DISTRIBUTION MEASUREMENT SYSTEM BASED ON IMAGE PROCESSING TECHNIQUE ON 300MW UTILITY BOILER

Calculation Errors of Flame Temperature Field Measurements Based on Color CCD

Improvements to the Three-Color Optical CCD-based Pyrometer System

An improved two-colour pyrometer based method for measuring dynamic temperature mapping of hydrogen-air combustion

A New Method Of Two-Color Calibration And One-Color Measurement For Real-Time Inspection Of Temperature Field

Research on Flame Monitoring Based on Image Processing Technology and PCA Method

Theoretical Fast Non-Intrusive 3-D Temperature Distribution Measurement Within Scattering Medium from Flame Emission Image Analysis

The Measurement of Intersection Temperature Distribution of Coal Burning Flame Using Algebra Reconstruction Technique (ATR) Based on Radiation Image