Abstract:Potassium sodium niobate ((K0.5Na0.5)NbO3)-based lead-free piezoelectric ceramics are excellent ferroelectric materials and have been demonstrated to have many practical applications. Recent studies have revealed that chemical doping plays a crucial role in optimizing the electromechanical coupling properties of (K0.5Na0.5)NbO3-based piezoelectric ceramics. In this paper, MnO2 is doped into potassium niobate (KNbO3) and (K0.5Na0.5)NbO3 piezoelectric ceramics prepared by the conventional solid-state reaction method. The influences of doped Mn cation on KNbO3 and (K0.5Na0.5)NbO3 piezoelectric ceramics including microstructure and macroscopic electrical properties are systematically investigated. The doping effects of Mn cation on the KNbO3 and (K0.5Na0.5)NbO3 piezoelectric ceramics are significantly different from each other. For the Mn-doped KNbO3 piezoelectric ceramics, the sizes of ferroelectric domains are reduced. Meanwhile, the diffused orthorhombic-tetragonal phase transition is observed, which is accompanied by reducing dielectric loss and Curie temperature, and broadening vibration peaks in Raman spectrum. It is known that the oxygen vacancy can be formed to compensate for the charges created by the acceptor doping of Mn into the B site of perovskite, and thus forming a defect dipole with the acceptor center. From the ferroelectric measurement, a double hysteresis loop (P- E curve) and a recoverable electric-field-induced strain due to the formation of defect dipole are observed. On the contrary, for the Mn-doped (K0.5Na0.5)NbO3 piezoelectric ceramics, the sizes of ferroelectric domains are not reduced. Meanwhile, the Curie temperature and vibration peaks in Raman spectrum are not changed. A rectangular hysteresis loop (P- E curve) and an unrecoverable electric-field-induced strain are observed in the ferroelectric measurement. The difference between these systems might originate from the greater ionic disorder and lattice distortion in (K0.5Na0.5)NbO3 piezoelectric ceramics. The difference in ionic radius between Na+ and K+ can affect the migration and distribution of oxygen vacancies, which makes it difficult to form stable defect dipoles in the Mn-doped (K0.5Na0.5)NbO3 piezoelectric ceramics. The results will serve as an important reference for preparing high-performance (K0.5Na0.5)NbO3-based piezoelectric ceramics via chemical doping.

Influence of Manganese Doping to the Full Tensor Properties of 0.24Pb(in1/2nb1/2)o3-0.47Pb(mg1/3nb2/3)o3-0.29pbtio3 Single Crystals.

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

Mn doping effects on electric properties of 0.93(Bi0.5Na0.5)TiO3‐0.07Ba(Ti0.945Zr0.055)O3 ceramics

Effects of MnO2 addition on the structure and electrical properties of PIN-PZN-PT ceramics with MPB composition

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Dielectric Behavior of Mn-doped Morphotropic Phase Boundary Composition in the Pb(Zn1/3Nb2/3)O3–BaTiO3– PbTiO3 System

Growth of Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystal boule with MnO content gradient along growth direction using continuous-feeding Bridgman method and MnO content dependence of ferroelectric and piezoelectric properties

Effects of Mn-Doping on PIN-PMN-PT Ceramics with MPB Composition

Mn‐doped Pb(In1/2Nb1/2)O3‐Pb(Mg1/3Nb2/3)O3‐PbTiO3 relaxor ferroelectric ceramics for high‐power piezoelectric applications

A complete set of material properties of single domain 0.26Pb(In(12)Nb(12))O(3)-0.46Pb(Mg(13)Nb(23))O(3)-0.28PbTiO(3) single crystals.

Effects of Mn Doping on Multiferroic and Magnetocapacitive Properties of 0.33ba0.70ca0.30tio3–0.67bifeo3 Diphasic Ceramics

Non-Integrability of a weakly integrable Hamiltonian system

Effect of Manganese Doping on Ferroelectric and Piezoelectric Properties of KNbO3 and (k0.5na0.5)nbo3 Lead-Free Ceramics

A Complete Set Of Material Properties Of Single Domain 0.26pb(In1/2nb1/2)O-3-0.46pb(Mg1/3nb2/3)O-3-0.28pbtio(3) Single Crystals

Growth and electrical properties of high‐Curie point rhombohedral Mn‐Pb(In 1/2 Nb 1/2 )O 3 ‐Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbTiO 3 thin films

Effects of Pb(Mn,Nb)O 3 doping on the properties of PZT-based films deposited on silicon substrates

Mn Doping of BiFeO3 for Microstructure and Electromagnetic Characteristics

Characterization of Mn-Doped PIN-PMN-PT Single Crystal Grown by Continuous-Feeding Bridgman Method

Comprehensive Optimization of Piezoelectric Coefficient and Depolarization Temperature in Mn-doped Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3-BaTiO3 Lead-Free Piezoceramics

Conductive mechanism and the enhancement high-power electrical properties of Mn-modified Bi(Sc3/4In1/4)O3–PbTiO3–Pb(Mg1/3Nb2/3)O3 high temperature piezoelectric ceramics

Sm2O3 and MnO2 codoped PMN-PZT ceramics with both high mechanical quality factor and piezoelectric properties