Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

A Botda with Break Interrogation Function over 72 Km Sensing Length

A Hybrid Single-End-Access BOTDA and COTDR Sensing System Using Heterodyne Detection

Time-division Multiplexing-Based BOTDA over 100km Sensing Length

Ultra-long Dual-Sideband BOTDA with Balanced Detection

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

157km BOTDA with pulse coding and image processing

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

Ultra-Long-Distance Hybrid Botda/Phi-Otdr

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

12-Km Distributed Fiber Sensor Based on Differential Pulse-Width Pair BOTDA

154.4Km Botda Based on Hybrid Distributed Raman Amplifications

Experimental demonstration on 2.5-m spatial resolution and 1 °c temperature uncertainty over long-distance BOTDA with combined Raman amplification and optical pulse coding

150 Km Fast BOTDA Based on the Optical Chirp Chain Probe Wave and Brillouin Loss Scheme.

Experimental Demonstration on 2.5m Spatial Resolution and 1oc Temperature Uncertainty over 74.6km BOTDA with Combined Raman Amplification and Optical Pulse Coding

Influence of Optical Simple Pulse Coding on the Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Enhancing the Performance of BOTDR Based on the Combination of FFT Technique and Complementary Coding.

142.2Km Botda Based on Ultra-Long Fiber Laser with A Ring Cavity

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs