Abstract:Part of developing new strategies for fabrications of nanowire structures involves in many cases the aid of metal nanoparticles (NPs). It is highly beneficial if one can define both diameter and position of the initial NPs and make well-defined nanowire arrays. This sets additional requirement on the NPs with respect to being able to withstand a pre-growth annealing process (i.e. de- oxidation of the III-V semiconductor surface) in an epitaxy system. Recently, it has been demonstrated that Ag may be an alternative to using Au NPs as seeds for particle-seeded nanowire fabrication. This work brings light onto the effect of annealing of Au, Ag and Au-Ag alloy NP arrays in two commonly used epitaxial systems, the Molecular Beam Epitaxy (MBE) and the Metalorganic Vapor Phase Epitaxy (MOVPE). The NP arrays are fabricated with the aid of Electron Beam Lithography on GaAs 100 and 111B wafers and the evolution of the NPs with respect to shape, size and position on the surfaces are studied after annealing using Scanning Electron Microscopy (SEM). We find that while the Au NP arrays are found to be stable when annealed up to 600 $^{\circ}$C in a MOVPE system, a diameter and pitch dependent splitting of the particles are seen for annealing in a MBE system. The Ag NP arrays are less stable, with smaller diameters ($\leq$ 50 nm) dissolving during annealing in both epitaxial systems. In general, the mobility of the NPs is observed to differ between the two the GaAs 100 and 111B surfaces. While the initial pattern is found be intact on the GaAs 111B surface for a particular annealing process and particle type, the increased mobility of the NP on the 100 may influence the initial pre-defined positions at higher annealing temperatures. The effect of annealing on Au-Ag alloy NP arrays suggests that these NP can withstand necessary annealing conditions for a complete de-oxidation of GaAs surfaces.

Quantitative Study of GaAs Nanowires Catalyzed by Au Film of Different Thicknesses

High-Density, Defect-Free, and Taper-Restrained Epitaxial Gaas Nanowires Induced from Annealed Au Thin Films

Growth of InAs Quantum Dots on GaAs Nanowires by Metal Organic Chemical Vapor Deposition.

Epitaxial nanowires Evolution of Epitaxial InAs Nanowires on GaAs ( 111 ) B * *

Growth of GaAs nanowires on Au, Au / Pd, Ag, Ni, Ga, Cu, Al, Ti metal films

Growth and characterization of GaAs nanowires on carbon nanotubes composite films: toward flexible nanodevices

In situ analysis of catalyst composition during gold catalyzed GaAs nanowire growth

T0301-1-1 Fabrication of Au Nanowire Utilizing Porous Aluminum

Annealing of Au, Ag and Au-Ag alloy nanoparticle arrays on GaAs (100) and (111)B

Analysis of incubation time preceding the Ga-assisted nucleation and growth of GaAs nanowires on Si(111)

Influence of Droplet Size on the Growth of High-Quality Self-Catalyzed Gaasp Nanowires

Growth of GaN Nanotubes and Nanowires on Au–Ni Catalysts

-growth orientation dependence of Ga2O3 nanowires on Cu3As seeds via vapor-solid-solid mechanism

Size and shape control of GaAs nanowires grown by metalorganic vapor phase epitaxy using tertiarybutylarsine

Effect of Sn Addition on Epitaxial GaAs Nanowire Grown at Different Temperatures in Metal–Organic Chemical Vapor Deposition

Understanding the Effect of Catalyst Size on the Epitaxial Growth of Hierarchical Structured InGaP Nanowires.

Anisotropic strain variations during the confined growth of Au nanowires

In Situ TEM Observation of the Vapor–solid–solid Growth of <001̄> InAs Nanowires

X-ray scattering study of GaN nanowires grown on Ti/Al$_{2}$O$_{3}$ by molecular beam epitaxy

Early stages of GaAs nanowires VLS self-catalyzed growth on silica-terminated silicon substrate: A photoemission study

Nonpolar GaAs Nanowires Catalyzed by Cu 5 As 2 : Insights into As Layer Epitaxy