Abstract:This study analyzes optical confinement factor and light emitting mode order for three different GaN LEDs: a conventional LED, thin Film LED, and thin Film LED with a photonic crystal (PhC) grating. For the first structure, we increase the thickness of AlxGa1-xN from 0 to 600nm, alter the x composition in AlxGa1-xN from 0.05 to 0.2 in steps of 0.05, and adjust the p-GaN and n-GaN thicknesses each from 0 to 200nm. For the second structure, we alter the n-GaN substrate thickness from 300-1000nm in steps of 100nm and 1000-4000nm in steps of 1000nm. These simulations show that increasing the substrate thickness causes the light emitting mode order to increase. The higher the mode, the more current is needed to make the device emit light. Higher current leads to shorter device lifetime. The last structure contains a photonic crystal grating with a period T = 100nm, 230nm, 460nm, 690nm, 920nm, 1500nm, 2000nm, 3000nm and 50% duty cycle. For each grating period, we display the effects on optical confinement factor and optical field intensity. The results show that changing the grating period does not affect the mode order, but does affect the optical field intensity. A larger grating period corresponds to lower optical field intensity. Maximizing optical field intensity increases the brightness of the device. The simulation method above can be used to improve the efficiency, brightness, and lifetime of GaN LEDs by reducing the effects of transverse mode coupling and maximizing the optical field intensity.

Analysis of the Light Extraction Efficiency of Light-Emitting Diodes with Photonic Crystals Combined with the Generalized Rouard Method.

Coupled Optical and Electronic Simulations of Electrically Pumped Photonic-Crystal-Based Leds

Accurate Optical Optimization of Light-Emitting Diodes with Consideration of Coupling Between Purcell Factor and Transmittance Coefficient

Improvement of Light Extraction Efficiency in GaN-based Light-Emitting Diodes by Addition of Complex Photonic Crystal Structure

Mechanism of Bragg Diffraction-Assisted Light Extraction in Gan-Based Light-Emitting Diodes Based on A Self-Consistent Model

Ray‐tracing Study of Bragg Diffraction‐assisted Light Extraction Efficiency of GaN‐based Light‐emitting Diodes with Vertical Sidewalls

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Ray-tracing study of Bragg applications and materials science diffraction-assisted light extraction efficiency of GaN-based light-emitting diodes with vertical sidewalls

Light Extraction Improvement of Gan Leds Using Nano-Scale Top Transmission Gratings

A Precise Ray Tracing Simulation Model for GaN Based Light Emitting Diodes

Enhanced Light Extraction of InGaN LEDs with Photonic Crystals Grown on P-Gan Using Selective-Area Epitaxy and Nanospherical-Lens Photolithography

Research on the Light Extraction Efficiency of Photonic Crystal LED Based on the Dipole Point Source Model

Photonic Crystal Light Emitting Diode

High-output power GaN-LED based on surface plasmon enhancement

Light Extraction Improvement of Gan-Based Light Emitting Diodes Using Patterned Undoped Gan Bottom Reflection Gratings

Role of surface microstructure and shape on light extraction efficiency enhancement of GaN micro-LEDs: A numerical simulation study

Efficiency improvement and droop behavior in nanospherical-lens lithographically patterned bottom and top photonic crystal InGaN/GaN light-emitting diodes.

Optical Mode Pattern Study of GaN LEDs with and Without Top Nano-Gratings

Ultra High Luminous Efficiency P-Type Surface Defect Structure GaN LED

Surface Light Extraction Mapping from Two-Dimensional Array of 12-Fold Photonic Quasicrystal on Current Injected Gan-Based Leds

Light extraction enhancement of light-emitting diodes by nanopillar hierarchical structures