Abstract:This study presents a material‐design‐processing combo for stretchable conductors and implantable devices to enhance communication between the body and external electronics. Results show improved conformability and stretchability with stable electrical performance. Electrical resistance remained below 1.5× initial resistance at 150% strain and after 10 000 fatigue cycles. Additionally, these optimized conductors are demonstrated in an animal spinal cord stimulation device. Neural implantable devices serve as electronic interfaces facilitating communication between the body and external electronic systems. These bioelectronic systems ideally possess stable electrical conductivity, flexibility, and stretchability to accommodate dynamic movements within the body. However, achieving both high electrical conductivity and mechanical compatibility remains a challenge. Effective electrical conductors tend to be rigid and stiff, leading to a substantial mechanical mismatch with bodily tissues. On the other hand, highly stretchable polymers, while mechanically compatible, often suffer from limited compatibility with lithography techniques and reduced electrical stability. Therefore, there exists a pressing need to develop electromechanically stable neural interfaces that enable precise communication with biological tissues. In this study, a polymer that is softening, flexible, conformal, and compatible with lithography to microfabricate perforated thin‐film architectures is utilized. These architectures offer stretchability and improved mechanical compatibility. Three distinct geometries are evaluated both mechanically and electrically under in vitro conditions that simulate physiological environments. Notably, the Peano structure demonstrates minimal changes in resistance, varying less than 1.5× even when subjected to ≈150% strain. Furthermore, devices exhibit a maximum mechanical elongation before fracture, reaching 220%. Finally, the application of multi‐electrode spinal cord leads employing titanium nitride for neural stimulation in rat models is demonstrated.

Materials and Designs for Wirelessly Powered Implantable Light-Emitting Systems.

Flexible Electronics: Materials and Designs for Wirelessly Powered Implantable Light‐Emitting Systems (small 18/2012)

Integrated Photonics Put at Full Stretch: Flexible and Stretchable Photonic Devices Enabled by Optical and Mechanical Co-Design

Stretchable, Curvilinear Electronics Based on Inorganic Materials

An Implantable Wireless Powered Light Source

(Invited) Mechanically Flexible Integrated Photonic Systems for Sensing and Communications

Body-conformable Light-Emitting Materials and Devices

Recent Advances in Flexible Inorganic Light Emitting Diodes: From Materials Design to Integrated Optoelectronic Platforms

Stretchable and Foldable Silicon Integrated Circuits

Optimized Structural Designs for Stretchable Silicon Integrated Circuits

Complementary Metal Oxide Silicon Integrated Circuits Incorporating Monolithically Integrated Stretchable Wavy Interconnects

Recent advances in the development of flexible dye-sensitized solar cells: Fabrication, challenges and applications- A Review

Softening, Conformable, and Stretchable Conductors for Implantable Bioelectronics Interfaces

Wireless Power and Data Transfer Technologies for Flexible Bionic and Bioelectronic Interfaces: Materials and Applications

Waterproof AlInGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics

Epidermal Electronics: Miniaturized Flexible Electronic Systems with Wireless Power and Near‐Field Communication Capabilities (adv. Funct. Mater. 30/2015)

Wearable and Implantable Light-Emitting Diodes and Their Biomedical Applications

Inorganic Semiconducting Materials for Flexible and Stretchable Electronics

Conductively Coupled Flexible Silicon Electronic Systems for Chronic Neural Electrophysiology.

Heterogeneously Integrated Optoelectronic Devices for Implantable Neural Interfaces

Light-emitting materials for wearable electronics