Abstract:In this work, we report the fabrication process of wavy top-emission organic light-emitting diodes (WOLEDs), which can sustain multiaxial tensile and compressive strains. The devices are fabricated using standard procedures, comprised of the conventional stacks of OLED materials and transfer printing process. Transferring these devices onto thermally prestrained elastomeric substrates and then releasing this strain configure the devices into random, two-dimensional (2D) wavy layouts. The performance of the WOLEDs is analyzed at +/- 1.5% (strain ratio =1.16) and +/- 3% (strain ratio =2.33) strain with respect to the prestrain value. The fabricated WOLEDs demonstrate good performance in the green light region within +/- 1.5% and show comparable results even at +/- 3% tensile and compression strains, which indicates that the fabricated devices can accommodate high strain ratios without inducing significant stresses in the devices. Finite element simulation demonstrates strong coherence with the experimental results and provides a valuable insight into the strain effects on each layer utilized for the device fabrication. Along with that, the neutral plane is generated around the upper region of emission and cathode layers in the devices. A slight blue shift observed by the electroluminescence analysis reveals that luminescence of various colors can be obtained by changing the dimensions of the wavy buckles. This research work can remarkably contribute to the fabrication of multicolored flexible, wearable indicators or curvilinear displays that require the ability not only to bend and stretch, but also to compress in multiple directions with a high strain ratio. (C) 2017 Elsevier B.V. All rights reserved.

Biaxially Stretchable "wavy" Silicon Nanomembranes.

Stretchable Ferroelectric Nanoribbons with Wavy Configurations on Elastomeric Substrates.

Multifunctional nano-accordion structures for stretchable transparent conductors

Mechanics of stretchable inorganic electronic materials

Biaxially Stretchable Ultrathin Si Enabled by Serpentine Structures on Prestrained Elastomers

Stretchable Electronics: Biaxially Stretchable Ultrathin Si Enabled by Serpentine Structures on Prestrained Elastomers (Adv. Mater. Technol. 1/2019)

Stretchable silicon electronics and their integration with rubber, plastic, paper, vinyl, leather and fabric substrates

Stretchable and Foldable Silicon Integrated Circuits

A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates

Mechanics of Stretchable Electronics

Complementary Metal Oxide Silicon Integrated Circuits Incorporating Monolithically Integrated Stretchable Wavy Interconnects

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Optimized Structural Designs for Stretchable Silicon Integrated Circuits

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Multiaxial Wavy Top-Emission Organic Light-Emitting Diodes on Thermally Prestrained Elastomeric Substrates

Stretchable, Curvilinear Electronics Based on Inorganic Materials

Elastically Relaxed Free-standing Strained-Si Nanomembranes

Monolithic Integration of Silicon Nanowire Networks As a Soft Wafer for Highly Stretchable and Transparent Electronics.

High-Performance Auxetic Bilayer Conductive Mesh-Based Multi-Material Integrated Stretchable Strain Sensors.

Mechanics of Noncoplanar Mesh Design for Stretchable Electronic Circuits

In‐Plane Self‐Turning and Twin Dynamics Renders Large Stretchability to Mono‐Like Zigzag Silicon Nanowire Springs