Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Fiber-Tip Micro-Cavity for Temperature and Transverse Load Sensing

A Novel Fiber-Tip Micro-Cavity Sensor for High Temperature Application

Low-Cost Fiber-Tip Fabry-Perot Interferometer and Its Application for High Temperature Sensing

Compact Optical Fiber Sensor Based on Silica Capillary Tube for Simultaneous High Temperature and Transverse Load Measurement

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Composite Cavity Fiber Tip Fabry-Perot Interferometer for High Temperature Sensing

Sensing Characteristics of the F-P Cavity on the Tip of a Microstructured Fiber

Temperature and Strain Fiber Sensor Design Based on Microstructural Fabry-Perot Cavity

A Compact Fiber-Tip Micro-Cavity Sensor for High-Pressure Measurement

Ultracompact Transverse Load and Temperature Fiber Sensor Probe Based on Cascaded Polymer Microspheres with Vernier Effect

Fiber tip high temperature sensor

Temperature-insensitive fiber optic Fabry-Perot interferometer based on special air cavity for transverse load and strain measurements.

Fiber Mach-Zehnder Interferometer Based on Microcavities for High-Temperature Sensing with High Sensitivity.

Highly Sensitive Temperature Sensing Performance of a Microfiber Fabry-Perot Interferometer with Sealed Micro-Spherical Reflector.

Compact Optical Fiber Temperature Sensor with High Sensitivity Based on Liquid-Filled Silica Capillary Tube

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

All-Fiber Fabry-Perot Micro-cavity Temperature-Insensitive Sensor for Strain Sensing Based on T-shaped Structure

Fiber Tip Temperature Sensor Based on PVA Filled Silica Tube Fabry-Perot Interferometer.

High-sensitivity fiber-optic Fabry-Perot transverse load sensor based on bubble microcavity

Temperature Characterization of Thin-Walled-microsphere Air-Cavity Fiber Sensing Structures

Strain-Insensitive Optical Fiber Mach-Zehnder Interferometric Temperature Sensor