Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

Correction: Formation of Zirconium Metallic Glass

Formation of Zirconium Metallic Glass.

Crystallization of Zr41Ti14Cu12.5Ni10Be22.5 Bulk Metallic Glass under High Pressure Examined by in Situ Synchrotron Radiation X-Ray Diffraction

New Crystalline Phases Formed in a Slowly-Cooled Zr-based Metallic Glass

High-pressure Effects on Ti–Zr–Ni Metallic Glass and Its Corresponding Quasicrystal

High-pressure annealing driven nanocrystal formation in Zr50Cu40Al10 metallic glass and strength increase

EXAFS and Molecular Dynamics Simulation Studies of Cu-Zr Metallic Glass: Short-to-medium Range Order and Glass Forming Ability

Pressure Effect On Crystallization Temperature In Zr70pd30 Metallic Glass

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

A TEM study on the crystallization behavior of an yttrium-doped Zr-based bulk metallic glass

A Novel Ni-Free Zr-Based Bulk Metallic Glass with High Glass Forming Ability, Corrosion Resistance and Thermal Stability

The effect of impurities in zirconium on the formation and mechanical properties of Zr55Cu30Al10Ni5 metallic glass

Glass formation enhanced by oxygen in binary Zr–Cu system

First-principles prediction and experimental verification of glass-forming ability in Zr-Cu binary metallic glasses

Formation of Zr-based Bulk Metallic Glasses from Low Purity Materials by Scandium Addition

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Formation of Zr-based bulk metallic glass with large amount of yttrium addition

Formation and crystallization of CuZrHfTi bulk metallic glass under ambient and high pressures

Effect of Zn Addition on the Crystallization Process in Zr65al7.5ni10cu17.5 Metallic Glass

Metallic glass formation in Cu–Ni–Ti (Zr, Hf) systems studied by thermodynamic calculations

Effect of topologically close-packed clusters on the pair distribution function of amorphous Zr under different pressures