Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

First-principles prediction and experimental verification of glass-forming ability in Zr-Cu binary metallic glasses

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

Prediction of Glass-Forming Ability and Atomic-Level Structure of the Al-Zr-Pd Metallic Glasses by Molecular Dynamics Simulations

Thermodynamic Calculation And Interatomic Potential To Predict The Favored Composition Region For The Cu-Zr-Al Metallic Glass Formation

Interatomic Potential to Predict the Favored and Optimized Compositions for Ternary Cu-Zr-Hf Metallic Glasses

Prediction of Favored and Optimized Compositions for Cu-Zr-Ni Metallic Glasses by Interatomic Potential

Thermodynamic Modeling of Glass Formation in Metallic Glasses

Theoretical study on the composition location of the best glass formers in Cu-Zr amorphous alloys

Glass Forming Abilities of Binary Cu100−xZrx (34, 35.5, and 38.2 At. %) Metallic Glasses: A LAMMPS Study

Predicting Bulk Metallic Glass Forming Ability with the Thermodynamic Density of Competing Crystalline States

Structural mechanism of glass forming ability in Zr-based binary alloys

Atomic-scale mechanisms of the glass-forming ability in metallic glasses

Prediction of Glass-Forming Ability and Characterization of Atomic Structure of the Co-Ni-Zr Metallic Glasses by a Proposed Long Range Empirical Potential

Design Of Cu8zr5-Based Bulk Metallic Glasses

Prediction of Bulk Metallic Glass Formation in Cu–Zr–Ag–Hf System by Thermodynamic and Topological Modeling

Chemical short-range order domain in bulk amorphous alloy and the prediction of glass forming ability

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

Construction of Al-Mg-Zn Interatomic Potential and the Prediction of Favored Glass Formation Compositions and Associated Driving Forces

Understanding Glass-Forming Ability Through Sluggish Crystallization of Atomically Thin Metallic Glassy Films

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

Computation Assisted Design of Favored Composition for Ternary Mg-Cu-Y Metallic Glass Formation