Abstract:The potential in a synaptic simulation for neuromorphic computation has revived the research interest of resistive random access memory (RRAM). However, novel applications require reliable multilevel resistive switching (RS), which still represents a challenge. We demonstrate in this work the achievement of reliable HfO-based RRAM devices for synaptic simulation by performing the Al doping and the postdeposition annealing (PDA). Transmission electron microscopy and operando hard X-ray photoelectron spectroscopy results reveal the positive impact of Al doping on the formation of oxygen vacancies. Detailed - characterizations demonstrate that the 16.5% Al doping concentration leads to better RS properties of the device. In comparison with the other reported results based on HfO RRAM, our devices with 16.5% Al-doping and PDA at 450 °C show better reliable multilevel RS (∼20 levels) performance and an increased on/off ratio. The 16.5% Al:HfO sample with PDA at 450 °C shows good potentiation/depression characteristics with low pulse width (10 μs) along with a good On/Off ratio (>1000), good data retention at room temperature, and high temperature and good program/erase endurance characteristics with a pulse width of 50 ns. The synapse features including potentiation, depression, and spike time-dependent plasticity were successfully achieved using optimized Al-HfO RRAM devices. Our results demonstrate the beneficial effects of Al doping and PDA on the enhancement of the performances of RRAM devices for the synaptic simulation in neuromorphic computing applications.

An Electronic Synapse Device Based on Solid Electrolyte Resistive Random Access Memory

Electrical Properties and Biological Synaptic Simulation of Ag/MXene/SiO2/Pt RRAM Devices

Adaptive Synaptic Memory via Lithium Ion Modulation in RRAM Devices

Advances of RRAM Devices: Resistive Switching Mechanisms, Materials and Bionic Synaptic Application

Reliable Ge2Sb2Te5 Based Phase-Change Electronic Synapses Using Carbon Doping and Programmed Pulses

A multilevel electrolyte-gated artificial synapse based on ruthenium-doped cobalt ferrite

Interface-engineered reliable HfO2-based RRAM for synaptic simulation

Artificial Synaptic Behavior and Its Improvement of RRAM Device with Stacked Solution-Processed MXene Layers

Photo-synaptic Memristor Devices from Solution-processed Ga2O3 Thin Films

A novel artificial synapse with dual modes using bilayer graphene as the bottom electrode.

Multilevel resistive switching and synaptic behaviors in MnO-based memristor

Organic-2D composite material-based RRAM with high reliability for mimicking synaptic behavior

Novel 2D Materials-based Resistive Devices

Emulating biological synaptic characteristics of HfOx/AlN-based 3D vertical resistive memory for neuromorphic systems

Intensive harmonized synapses with amorphous Cu2O-based memristive using ultrafine Cu nanoparticle sublayers formed via atomically controlled Electrochemical Pulse Deposition

Review of Electrical Stimulus Methods Ofin Situtransmission Electron Microscope to Study Resistive Random Access Memory

Toward a Reliable Synaptic Simulation Using Al-Doped HfO 2 RRAM.

Metal Oxide Resistive Random Access Memory Based Synaptic Devices for Brain-Inspired Computing

Long-Term Memory Performance with Learning Behavior of Artificial Synaptic Memristor Based on Stacked Solution-Processed Switching Layers

3D Trigonal FAPbI3‐based Multilevel Resistive Switching Nonvolatile Memory for Artificial Neural Synapse

A sub-1-volt analog metal oxide memristive-based synaptic device for energy-efficient spike-based computing systems