Abstract:This paper establishes a transient equivalent circuit of cross‐line same‐phase successive grounding faults, and analyses the characteristics of zero‐sequence current. Then, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed. Finally, a method for faulty line detection based on cross‐correlation distance and transient energy is proposed and different fault conditions verify the effectiveness of proposed method. Currently, theoretical analysis of single‐phase grounding (SPG) faults in low‐current grounding systems has reached a high level of refinement, and the corresponding detection methods have matured. However, there is a significant lack of research on successive grounding (SG) faults, particularly in the area of detecting cross‐line same‐phase successive grounding (CSSG) faults in arc suppression coil grounding systems. To address these issues, a novel faulty line detection method based on transient characteristics of CSSG is proposed. Firstly, a transient equivalent circuit is established, and the characteristics of transient zero‐sequence current (ZSC) are theoretically analysed. Secondly, variational mode decomposition (VMD) is employed to extract low and high‐frequency information from intrinsic mode functions (IMFs). Subsequently, a fault initiation criterion based on kurtosis theory and the Teager‐Kaiser energy operator (TKEO) is proposed, which can accurately detect the occurrence time of secondary faults. Finally, a method for faulty line detection based on cross‐correlation distance (CCD) and transient energy (TE) is proposed. The results of PSCAD simulation under different conditions and field test affirm the accuracy of the analysis and the effectiveness of the proposed method.

A Novel Method for Fault Diagnosis of Grounding Grids

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

Novel Method Of Corrosion Diagnosis For Grounding Grid

Diagnosis of Breaks in Substation's Grounding Grid by Using the Electromagnetic Method

Simulation and Experimentation of a Grounding Network Detection Scheme Based on a Low-Frequency Electromagnetic Method

Investigation on test schemes for grounding grids corrosion diagnosis

A Novel Fault Location Method for High Impedance Grounding Fault in Distribution Network

The Theory and Implementation of Corrosion Diagnosis for Grounding System

Novel Approach of Fault Diagnosis in Power Grid Using Information Fusion

Experimental Research on Typical Single-Phase High Resistance Grounding Fault Detection Methods in Resonant Grounding Distribution System

Faulty line detection for cross‐line same‐phase successive ground faults in distribution network based on transient characteristics

A Novel Method of Fault Diagnosis Based on Synchronized Phasor Measuring and Flow Fingerprint Identification Technology

Novel Fault Location in MTDC Grids With Non-Homogeneous Transmission Lines Utilizing Distributed Current Sensing Technology

Study on Locating Techniques of Single-phase Grounding Fault in Distribution Network

An Electromagnetic Approach To Analyze The Performance Of The Substation'S Grounding Grid In High Frequency Domain

Safety Performance of Large Grounding Grid with Fault Current Injected from Multiple Grounding Points

Research on grounding grid corrosion detection based on hybrid artificial intelligence algorithm

High-Resistance Grounding Fault Detection and Line Selection in Resonant Grounding Distribution Network

Analysis and Detection of High Impedance Grounding Fault in Neutral Point Effectively Grounding Distribution Network

A Novel Single-Ended Fault Location Method for Locating Double-Phase to Earth Faults

A Fault Section Location Method for Small Current Neutral Grounding System Based on Energy Relative Entropy of Generalized S-Transform