Abstract:In recent advancements, the traditional von Neumann architecture has been challenged by the computational needs of AI. This is due to its high power and data transfer costs. As a solution, the computing-in-memory (CIM) architecture, which combines storage and computation, has gained attention for its superior computational power and energy efficiency. Within CIM, using resistive random access memory (RRAM) arrays, the readout circuit, which converts analog outputs from multiply–accumulate operations into digital signals, faces limitations due to its area and power consumption. There are mainly two types of CIM readout circuits for analog types: the traditional ADC type and the non-traditional type. This paper presents two types of readout circuit designs. The first is a low-power, compact successive approximation register (SAR) analog-to-digital converter (ADC) readout circuit. The core circuit is an 8-bit SAR ADC operating at 70 MS/s. It incorporates a linearity-improved bootstrapped switch to minimize leakage and enhance linearity, whose spurious-free dynamic range (SFDR) has been improved by 10.1 dB from 76.78 dB to 86.88 dB, and whose signal-to-noise and distortion ratio (SNDR) has increased by 4.56 dB from 75.13 dB to 79.69 dB. The delay of a transconductance-enhanced dynamic comparator is reduced from 184 ps to 149 ps, presenting a performance improvement of approximately 20%. Concurrently, the energy consumption decreased from 178 μm to 132 μm, attaining an improvement of roughly 26%. A "sandwich" capacitor structure is used that reduces the overall area of the layout. After layout and post-simulation, this circuit occupies only 49.6 μm × 51.5 μm, consumes 553 μW power, has a SINAD of 46.22 dB, and has an SFDR of 57.21 dB. The second is a current controlled oscillator (CCO)-type readout circuit, which comprises a CCO oscillator with low process-sensitivity. The readout circuit also utilizes an op-amp and current mirrors for a negative feedback loop, ensuring a constant voltage across the RRAM arrays. The frequency generated through the CCO is controlled by the current, and quantified by a counter, supporting different weights quantification per ReRAM column without additional digital weighting. This circuit achieves 95-level resolution, 5.2 μs delay, and an average consumption of 183.1 μW. A comparative analysis highlights that traditional ADC readout circuits offer high resolution and speed but are limited by their high power and area costs, often overshadowing CIM arrays' benefits. Thus, for applications with more lenient resolution and speed requirements, non-traditional readout circuits present considerable advantages.

RRAM-Based Analog Approximate Computing

Exploring the Precision Limitation for RRAM-Based Analog Approximate Computing.

Energy Efficient RRAM Crossbar-Based Approximate Computing for Smart Cameras

Memristor-based Approximated Computation.

An RRAM-Based Digital Computing-in-Memory Macro with Dynamic Voltage Sense Amplifier and Sparse-Aware Approximate Adder Tree

A 28nm Hybrid 2T1R RRAM Computing-in-Memory Macro for Energy-efficient AI Edge Inference

Parallel Stateful Logic in RRAM: Theoretical Analysis and Arithmetic Design

A Compact Model of Analog RRAM With Device and Array Nonideal Effects for Neuromorphic Systems

Approx-IMC: A general-purpose approximate digital in-memory computing framework based on STT-MRAM

RRAM-based Floating-Point In-Memory-Computing Architecture for High Throughput Signal Processing

Architecture-circuit-technology Co-Optimization for Resistive Random Access Memory-Based Computation-in-memory Chips

Readout Circuit Design for RRAM Array-Based Computing in Memory Architecture

A 28-Nm RRAM Computing-in-Memory Macro Using Weighted Hybrid 2T1R Cell Array and Reference Subtracting Sense Amplifier for AI Edge Inference

Approximate data mapping in refresh-free DRAM for energy-efficient computing in modern mobile systems

A compute-in-memory chip based on resistive random-access memory

System and Technology Co-optimization for RRAM Based Computation-in-memory Chip

A 9T4R RRAM-Based ACAM for Analogue Template Matching at the Edge

RRAM-based CAM combined with time-domain circuits for hyperdimensional computing

An 8-Bit RRAM Based Multiplier for Hybrid Memory Computing

MErging the Interface: Power, Area and Accuracy Co-Optimization for RRAM Crossbar-Based Mixed-Signal Computing System

C-RRAM: A Fully Input Parallel Charge-Domain RRAM-based Computing-in-Memory Design with High Tolerance for RRAM Variations