Abstract:In recent advancements, the traditional von Neumann architecture has been challenged by the computational needs of AI. This is due to its high power and data transfer costs. As a solution, the computing-in-memory (CIM) architecture, which combines storage and computation, has gained attention for its superior computational power and energy efficiency. Within CIM, using resistive random access memory (RRAM) arrays, the readout circuit, which converts analog outputs from multiply–accumulate operations into digital signals, faces limitations due to its area and power consumption. There are mainly two types of CIM readout circuits for analog types: the traditional ADC type and the non-traditional type. This paper presents two types of readout circuit designs. The first is a low-power, compact successive approximation register (SAR) analog-to-digital converter (ADC) readout circuit. The core circuit is an 8-bit SAR ADC operating at 70 MS/s. It incorporates a linearity-improved bootstrapped switch to minimize leakage and enhance linearity, whose spurious-free dynamic range (SFDR) has been improved by 10.1 dB from 76.78 dB to 86.88 dB, and whose signal-to-noise and distortion ratio (SNDR) has increased by 4.56 dB from 75.13 dB to 79.69 dB. The delay of a transconductance-enhanced dynamic comparator is reduced from 184 ps to 149 ps, presenting a performance improvement of approximately 20%. Concurrently, the energy consumption decreased from 178 μm to 132 μm, attaining an improvement of roughly 26%. A "sandwich" capacitor structure is used that reduces the overall area of the layout. After layout and post-simulation, this circuit occupies only 49.6 μm × 51.5 μm, consumes 553 μW power, has a SINAD of 46.22 dB, and has an SFDR of 57.21 dB. The second is a current controlled oscillator (CCO)-type readout circuit, which comprises a CCO oscillator with low process-sensitivity. The readout circuit also utilizes an op-amp and current mirrors for a negative feedback loop, ensuring a constant voltage across the RRAM arrays. The frequency generated through the CCO is controlled by the current, and quantified by a counter, supporting different weights quantification per ReRAM column without additional digital weighting. This circuit achieves 95-level resolution, 5.2 μs delay, and an average consumption of 183.1 μW. A comparative analysis highlights that traditional ADC readout circuits offer high resolution and speed but are limited by their high power and area costs, often overshadowing CIM arrays' benefits. Thus, for applications with more lenient resolution and speed requirements, non-traditional readout circuits present considerable advantages.

A 9T4R RRAM-Based ACAM for Analogue Template Matching at the Edge

An 8-Bit in Resistive Memory Computing Core with Regulated Passive Neuron and Bitline Weight Mapping

A 28nm Hybrid 2T1R RRAM Computing-in-Memory Macro for Energy-efficient AI Edge Inference

A 28-Nm RRAM Computing-in-Memory Macro Using Weighted Hybrid 2T1R Cell Array and Reference Subtracting Sense Amplifier for AI Edge Inference

Edge AI without Compromise: Efficient, Versatile and Accurate Neurocomputing in Resistive Random-Access Memory

A compute-in-memory chip based on resistive random-access memory

An Energy Efficient Computing-in-Memory Accelerator With 1T2R Cell and Fully Analog Processing for Edge AI Applications

A Reconfigurable 4T2R ReRAM Computing In-Memory Macro for Efficient Edge Applications

RRAM Computing-in-Memory Using Transient Charge Transferring for Low-Power and Small-Latency AI Edge Inference

RRAM-based CAM combined with time-domain circuits for hyperdimensional computing

An Energy-efficient Capacitive-RRAM Content Addressable Memory

Readout Circuit Design for RRAM Array-Based Computing in Memory Architecture

A Fully Integrated System‐on‐Chip Design with Scalable Resistive Random‐Access Memory Tile Design for Analog in‐Memory Computing

A 40-nm, 64-Kb, 56.67 TOPS/W Voltage-Sensing Computing-In-Memory/Digital RRAM Macro Supporting Iterative Write With Verification and Online Read-Disturb Detection

An RRAM-Based Digital Computing-in-Memory Macro with Dynamic Voltage Sense Amplifier and Sparse-Aware Approximate Adder Tree

An ADC-less RRAM-based Computing-in-Memory Macro with Binary CNN for Efficient Edge AI

A 28 Nm RRAM-Based 81.1 TOPS/mm2/bit Compute-In-Memory Macro with Uniform and Linear 64 Read Channels under 512 4-Bit Inputs

Device and circuit optimization of RRAM for neuromorphic computing

A 28 nm 81 Kb 5995.3 TOPS/W 4T2R ReRAM Computing-in-Memory Accelerator With Voltage-to-Time-to-Digital Based Output

Intelligent Computing with RRAM

Compute-in-Memory with 6T-RRAM Memristive Circuit for Next-Gen Neuromorphic Hardware