Abstract:In recent advancements, the traditional von Neumann architecture has been challenged by the computational needs of AI. This is due to its high power and data transfer costs. As a solution, the computing-in-memory (CIM) architecture, which combines storage and computation, has gained attention for its superior computational power and energy efficiency. Within CIM, using resistive random access memory (RRAM) arrays, the readout circuit, which converts analog outputs from multiply–accumulate operations into digital signals, faces limitations due to its area and power consumption. There are mainly two types of CIM readout circuits for analog types: the traditional ADC type and the non-traditional type. This paper presents two types of readout circuit designs. The first is a low-power, compact successive approximation register (SAR) analog-to-digital converter (ADC) readout circuit. The core circuit is an 8-bit SAR ADC operating at 70 MS/s. It incorporates a linearity-improved bootstrapped switch to minimize leakage and enhance linearity, whose spurious-free dynamic range (SFDR) has been improved by 10.1 dB from 76.78 dB to 86.88 dB, and whose signal-to-noise and distortion ratio (SNDR) has increased by 4.56 dB from 75.13 dB to 79.69 dB. The delay of a transconductance-enhanced dynamic comparator is reduced from 184 ps to 149 ps, presenting a performance improvement of approximately 20%. Concurrently, the energy consumption decreased from 178 μm to 132 μm, attaining an improvement of roughly 26%. A "sandwich" capacitor structure is used that reduces the overall area of the layout. After layout and post-simulation, this circuit occupies only 49.6 μm × 51.5 μm, consumes 553 μW power, has a SINAD of 46.22 dB, and has an SFDR of 57.21 dB. The second is a current controlled oscillator (CCO)-type readout circuit, which comprises a CCO oscillator with low process-sensitivity. The readout circuit also utilizes an op-amp and current mirrors for a negative feedback loop, ensuring a constant voltage across the RRAM arrays. The frequency generated through the CCO is controlled by the current, and quantified by a counter, supporting different weights quantification per ReRAM column without additional digital weighting. This circuit achieves 95-level resolution, 5.2 μs delay, and an average consumption of 183.1 μW. A comparative analysis highlights that traditional ADC readout circuits offer high resolution and speed but are limited by their high power and area costs, often overshadowing CIM arrays' benefits. Thus, for applications with more lenient resolution and speed requirements, non-traditional readout circuits present considerable advantages.

MErging the Interface: Power, Area and Accuracy Co-Optimization for RRAM Crossbar-Based Mixed-Signal Computing System

A Low-Power In-Memory Multiplication and Accumulation Array with Modified Radix-4 Input and Canonical Signed Digit Weights

Modeling and Benchmarking Computing-in-Memory for Design Space Exploration.

Mitigating RC-Delay Induced Accuracy Loss in Analog In-Memory Computing: A Non-Compromising Approach

CSA-CiM: Enhancing Multi-Functional Computing-in-Memory with Configurable Sense Amplifiers

System and Technology Co-optimization for RRAM Based Computation-in-memory Chip

A Peripheral Circuit Reuse Structure Integrated with a Retimed Data Flow for Low Power RRAM Crossbar-Based CNN.

Architecture-circuit-technology Co-Optimization for Resistive Random Access Memory-Based Computation-in-memory Chips

AERIS: Area/Energy-Efficient lT2R ReRAM Based Processing-in-Memory Neural Network System-on-a-Chip

Architectural Exploration of Application-Specific Resonant SRAM Compute-in-Memory (rCiM)

AERIS - area/energy-efficient 1T2R ReRAM based processing-in-memory neural network system-on-a-chip.

MCAIMem: a Mixed SRAM and eDRAM Cell for Area and Energy-efficient on-chip AI Memory

A 28nm 8928Kb/mm 2 -Weight-Density Hybrid SRAM/ROM Compute-in-Memory Architecture Reducing >95% Weight Loading from DRAM.

Readout Circuit Design for RRAM Array-Based Computing in Memory Architecture

Accuracy Optimization with the Framework of Non-Volatile Computing-In-Memory Systems

Computation-oriented Fault-Tolerance Schemes for RRAM Computing Systems

Memristor Based Mixed-Accuracy Computation-in-Memory System.

Device-Architecture Co-optimization for RRAM-based In-memory Computing.

RDCIM: RISC-V Supported Full-Digital Computing-in-Memory Processor With High Energy Efficiency and Low Area Overhead

Algorithm-hardware co-design for Energy-Efficient A/D conversion in ReRAM-based accelerators

Intra-array Non-Idealities Modeling and Algorithm Optimization for RRAM-based Computing-in-Memory Applications