Abstract:The fast mechanical switch equipped with the Thomson-coil actuator is one of the key devices in hybrid HVDC circuit breaker. And electromagnetic damping technology can solve the problems of high-speed damping operation without adding additional mechanical parts. In order to make the opening/closing operation process as unified as possible, the driving and damping voltages are the same in the previous research. In this paper, the effects of different combinations of driving and damping voltages on the travel characteristics have been studied. Voltage combinations are divided into three types. The first type is to change the driving and damping voltage at the same time; the second is to keep the damping voltage constant and change the driving voltage; the last type is to keep the driving voltage constant and change the damping voltage. In order to ensure that the contacts system can move to the isolating distance in 3 ms, the driving voltage should not be reduced. At the same time, in order to ensure a better damping effect, the buffer start time range should be as large as possible. Therefore, it is suggested that the damping voltage is 2%–4% lower than the driving voltage. A fast simulation method based on equivalent circuit method, which avoids lots of test operations, has been proposed in this paper. It can provide reliable references for the application and improve the feasibility and reliability of fast mechanical switch in engineering.

Evaluation of Design Variables in Thompson Coil Based Operating Mechanisms for Ultra-Fast Opening in Hybrid AC and DC Circuit Breakers

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

A Fast Mechanical Switch for Medium Voltage Hybrid DC and AC Circuit Breakers

Drive Circuits for Ultra-Fast and Reliable Actuation of Thomson Coil Actuators Used in Hybrid Ac and Dc Circuit Breakers

A Review on Thomson Coil Actuators in Fast Mechanical Switching

Active Damping of Ultrafast Mechanical Switches for Hybrid AC and DC Circuit Breakers

Research on Operating Mechanism for Ultra-Fast 40.5-Kv Vacuum Switches

Closing Performance of the Thomson-coil Actuator for a 110kv FMS

A Medium-Voltage Hybrid DC Circuit Breaker—Part II: Ultrafast Mechanical Switch

High-speed Switch Driving Circuit Analysis of DC Medium Voltage Breaker

Effect of Voltage on Thomson-Coil Actuator for Fast Mechanical Switch

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Reduced-Time Finite Element Model for Thomson Coil Actuator

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Analysis of structure strength for direct current high-speed switch based on flexible body theory

Research on a Novel Drive Unit of Fast Mechanical Switch with Modular Double Capacitors

A Novel High-Efficient and Miniaturized Operating Method for Ultra-Fast Vacuum Switch

Contact Parameter Computation and Analysis of Air Circuit Breaker with Permanent Magnet Actuator

Simulation and Experimental Research on Low Voltage DC Switching Fast Repulsion Mechanism

3-D Transient Finite-Element Analysis and Experimental Investigation of Short-Circuit Dynamic Stability for Air Circuit Breaker

Analysis And Improve Of Electromagnet Mechanism For Integrated Control And Protective Switching Devices