Abstract:Coils are widely used in magnetorheological dampers, solenoid valves, and electron guns, where a quick response of the magnetic induction to the excitation voltage is needed. To achieve a quick response, the response time of the magnetic induction relative to the current and that of the current relative to the voltage should be shortened as much as possible. The latter is dominant in the total response time and can be shortened by using voltage control with an increased resistance or current control. The current time responses of the Helmholtz coils based on voltage control with an increased resistance and current control are measured. The results indicate that the current response times of the coils based on voltage control with resistances of 23.7 and 162 omega and current control with a resistance of 23.7 omega are 235.3, 42.3, and 62.1 mu s, respectively. The current time responses of the voltage control are smooth, while those of the current control have large oscillations. Based on Kirchhoff's equilibrium equation, an overshoot voltage waveform design method is proposed to shorten the current response time and eliminate the current oscillations. The experimental results show that the current time response is smooth, and the current response time can be shortened by 91.8%, 54.4%, and 68.9% in comparison with those of the former three control cases. The demonstration experiments of the effect of the different control methods on the electron-beam scanning path and hot spot distribution show that the scanning path and dwell duration are closer to the expected ones with the proposed method. The proposed method is of great value for improving the damping performance of a magnetorheological damper, the accuracy of the fluid injection of a solenoid valve, and the accuracy of the electron-beam thermal assessment.

Effect of Voltage on Thomson-Coil Actuator for Fast Mechanical Switch

Active Damping of Ultrafast Mechanical Switches for Hybrid AC and DC Circuit Breakers

Drive Circuits for Ultra-Fast and Reliable Actuation of Thomson Coil Actuators Used in Hybrid Ac and Dc Circuit Breakers

A Review on Thomson Coil Actuators in Fast Mechanical Switching

Closing Performance of the Thomson-coil Actuator for a 110kv FMS

Research on Operating Mechanism for Ultra-Fast 40.5-Kv Vacuum Switches

Research on a Novel Drive Unit of Fast Mechanical Switch with Modular Double Capacitors

Evaluation of Design Variables in Thompson Coil Based Operating Mechanisms for Ultra-Fast Opening in Hybrid AC and DC Circuit Breakers

A Fast Mechanical Switch for Medium Voltage Hybrid DC and AC Circuit Breakers

A Novel High-Efficient and Miniaturized Operating Method for Ultra-Fast Vacuum Switch

Analysis of structure strength for direct current high-speed switch based on flexible body theory

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Research on the Coordination of 40.5kv Fast Vacuum Switch Driven by Electromagnetic Repulsion Mechanism and Oil Damper

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Novel High Voltage Switch for Damped Oscillatory Voltage Testing System

Reduced-Time Finite Element Model for Thomson Coil Actuator

Research on ultra-fast vacuum mechanical switch driven by repulsive force actuator

Fast Operating Moving Coil Actuator for a Vacuum Interrupter

A Voltage Waveform Design Method for Shortening Current Response Time of a Coil.

A New Thomson Coil Actuator: Principle and Analysis

High-speed Switch Driving Circuit Analysis of DC Medium Voltage Breaker