Abstract:Gamma imager capable of monitoring, detection and localization of radioactive sources is of critical importance for nuclear safety and homeland security with the increasing use of radioactive sources in applications of nuclear technology. A 4π view gamma imager based on gamma ray occlusion technique is under development in our lab. The key component of the gamma imager is a 3D position-sensitive detector, which enables 4π field of view of the imager. In this work, we propose a 3D positionsensitive detector design for the 4π view gamma imager based on dual-ended readout (DER) technique. The detector was composed of a GAGG block coupled to an SiPM array at both crystal ends. DOI calibration was conducted with a collimated fan beam 18F source and DOI resolution was evaluated. Energy calibration was performed for each 3D position region of the detector by incorporating 3D position information to correct for the energy response inconsistency at different 3D position regions inside the detector. Various radioisotopes including 99mTc, 131I, 137Cs and 22Na were tested. An exponential factor was applied to compensate for energy response non-linearity due to SiPM saturation effect at higher gamma energy. The measured average DOI resolution was 1.96 ± 0.21 mm for all the four DER detector modules, indicating excellent 3D positioning accuracy of the detector design. With the proposed energy calibration approach, characteristic photopeaks of each radioisotope can be clearly identified at the correct energy position on the measured energy spectra. The achieved energy resolution was 9.76% at 662 keV, demonstrating good energy performance of the detector design, which could benefit radioisotope identification capability of the gamma imager. To conclude, the proposed 3D position-sensitive detector design based on DER technique features good 3D positioning and energy performance and is feasible for the 4π view gamma imager.

Design and application of an ultra low current digitizer with large dynamic range

Design of a High Precision Chip for Detecting Electric Arc

Development of radiation tolerance evaluation and measurement system for spaceborne D/A converter

Research of Quantitative Analyzer for Fluorescence Immune Chromatography Strips

Multi-channel Weak Current Acquisition System for X-ray Sensor

Design of a High Sensitive Environmental γRadiation Monitor System with Low Temperature Coefficient

A Full Digitizing Design of Measuring Systems in Diagnosing of High-Intensity Pulsed Radiation Field

Optimization of energy resolution and Pulse Shape Discrimination for a CLYC detector with integrated digitizers

A 44μw 140Db-Dr Hybrid Light-to-Digital Converter with Current-Tracking Dynamic Zoom and Power-Scaling OTA

Design of a Programmable Gain Waveform Digitization Instrument for Detector Calibration

Quantitative Analysis of Energy Resolution and Pulse Shape Discrimination of CLYC Detector with Integrated Digitizers

Preliminary Design of Integrated Digitizer Base for Photomultiplier Tube

A Portable Digital-Control Electrochemical System with Automatic Ohmic Drop Compensation for Fast Scan Voltammetry and Its Application to Ultrasensitive Detection of Chromium(iii)

Design of transient front-end signal digitizer for x-ray detector in laser inertial confinement fusion facility

Design of a high-dynamic-range prototype readout system for VLAST calorimeter

Enhanced Limit-of-Detection of Current Sensor Based on Tunneling Magnetoresistive Effect With Multichips Differential Design

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique

Design and Development of a 3D Position-Sensitive Detector for 4π View Gamma Imager Based on Dual-Ended Readout Technique

Performance of digital data acquisition system in gamma-ray spectroscopy

A digitizer based compact digital spectrometer for ion beam analysis using Field Programmable Gate Arrays and various energy algorithms

Development of Large Area Silicon Semiconductor Detectors for Use in the Current Mode