Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

A Dual-Layer Micromachined PMN-PT 1-3 Composite Transducer for Broadband Ultrasound Imaging

40-Mhz Micromachined PMN-PT Composite Ultrasound Array for Medical Imaging

High Frequency PMN-PT 1-3 Composite Transducer for Ultrasonic Imaging Application

Investigation of Broadband Characteristics of Multi-Frequency Piezoelectric Micromachined Ultrasonic Transducer (Mf-Pmut)

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

A PMN-PT Micromachined 1–3 Composite Circular Array for IVUS

Development of Broadband High-Frequency Piezoelectric Micromachined Ultrasonic Transducer Array

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

PMN-PT Single Crystal Thick Films on Silicon Substrate for High-Frequency Micromachined Ultrasonic Transducers.

Design of efficient, broadband single-element (20-80 MHz) ultrasonic transducers for medical imaging applications

Ultrawide Bandwidth High-Frequency Ultrasonic Transducers with Gradient Acoustic Impedance Matching Layer for Biomedical Imaging

PMN-PT Single Crystal Ultrasonic Transducer with Half-Concave Geometric Design for IVUS Imaging

80-Mhz Intravascular Ultrasound Transducer Using PMN-PT Free-Standing Film

A PMN-PT Composite-Based Circular Array for Endoscopic Ultrasonic Imaging

Miniature Ultrasound Transducer Incorporating Sm-PMN-PT 1-3 Composite

Multi-frequency Broadband Piezoelectric Micromachined Ultrasonic Transducer Utilizing Helmholtz Resonance

Ultrabroad-bandwidth ultrasonic transducer based on Sm-doped PMN-PT ceramic/epoxy 1-3 composite

Micromachined PIN-PMN-PT Crystal Composite Transducer for High-Frequency Intravascular Ultrasound (IVUS) Imaging

Advancement in PMN-PT Transparent Piezoelectric Ceramic for Photoacoustic/ultrasound Dual-Mode Imaging

Broadband transparent ultrasound transducer with polymethyl methacrylate as matching layer for in vivo photoacoustic microscopy