Abstract:As an unavoidable hazard threatening the mining safety and an important energy resources for human society and environmental protection, coalbed methane (CBM) extraction is proved to be of great importance pre mining. The method of upward borehole extraction is commonly used for underground gas extraction, however, some limitations of the traditional sealing methods and materials always make poor sealing results and extraction efficiency. In this paper, a method of upward borehole self-sealing technology using drill cuttings has been proposed. The sealing failure of the upward boreholes has been investigated and three potential leakage paths for air have also been studied, such as the defects of the sealing material, the channels between materials and the borehole walls, and the cracks around the borehole. An experimental system was been established to simulate upward borehole self-sealing technology, and some critical parameters, like particle size distribution (PSD) and the motion of drill cuttings within the borehole, were investigated. The PSD results indicated that huge amount of small scale particles could be compacted to be dense with low porosity; the motion of particles results shown that the cracks around the boreholes could be occupied by different scales of particles due to the large initial velocity; the angle of repose for accumulated particles increased as the increasing particle volume, blocking the contact interface by some water-coal fines. A field application was carried out in the No. 8 coal mine in Pingdingshan, China, and the high concentration of extracted CBM verified the feasibility of upward borehole self-sealing technology, in which these boreholes could be sealed by cuttings by preventing the three potential leakage paths, and the concentration variances indicated that the effective sealing duration could be recognized. The laboratory and field results all prove that the method of upward borehole self-sealing using drill cuttings could be helpful to improve CBM extraction efficiency and might be a potential and promising technology in the future.

Research Progress and Discussion on Modified Cement-Based Borehole Sealing Materials for Mining

Research on the Performance of Cement-Based Composite Borehole Sealing Material Based on Orthogonal Test

Theories, Techniques and Materials for Sealing Coalbed Methane Extraction Boreholes in Underground Mines: A Review

Performance of New Inorganic Retarding Sealing Material for Gas Drainage Boreholes

Performance and application of new inorganic retarding sealing material suitable for multi-scale fractures

Experimental Research on Performance of New Gas Drainage Borehole Sealing Material with High Fluidity

Comparative analysis of sealing effect of different hole sealing processes in coal mine

Experimental Study on the Optimization of Polymer-Modified Cement-Based Composite Sealing Materials and Mechanical Properties and Permeability of Cemented Coal Bodies

Study on the Mechanics and Pore Characteristics of Coal Seam Drilling Sealing Materials Based on Nanomaterial Optimization.

Preparation of a New Borehole Sealing Material of Coal Seam Water Infusion

Experimental study comparing the microscopic properties of a new borehole sealing material with ordinary cement grout

Development and Application of Water Sealing Technology for Gas Drainage Boreholes

Study on the mechanical properties and microstructure of a rich-watered grouting material

Research and application of hydraulic fracturing borehole bag sealing technology

Investigation of sealing mechanism and field application of upward borehole self-sealing technology using drill cuttings for safe mining

Effect of nano-SiO2/styrene-acrylic emulsion on compactness and strength of mine drilling seal materials

Development and performance testing of the new sealing material for gas drainage drilling in coal mine

Review and Prospects of New Materials in Urban Underground Development

Microscopic properties and sealing performance of new gas drainage drilling sealing material

Research and Application of "Concentric Ring" Reinforcement and Sealing Technology for Gas Drainage Boreholes in Soft-Coal Seams

Research and Application of Sealed coring Technology in In-situ Coal Seam of Directional Long borehole in Coal mine