Abstract:The quality of borehole sealing is a key factor affecting the efficiency of gas production. A new water-rich grouting material (RW) with composite coagulant and other additives was prepared in this study to overcome the disadvantages of long setting time and low stone rate of traditional cement materials. When the coagulants A is 4 g and coagulants B is 2 g, the setting time of RW material was reduced by 60.85% and 50.62%, which significantly shortened the setting time of the RW material, respectively. Based on the orthogonal method, 29 groups of comparative experiments were designed to investigate the interaction mechanism between different additives on the performance index of RW, including setting time, water secretion rate, and compressive strength. Quadratic regression equations were fitted using the response surface method. All the correlation coefficients R2 of each response model were greater than 0.97, R2 and R2adj were less than 0.2 through variance analysis, indicating a high correlation between the actual and prediction results. The water–cement ratio had the most significant effect among all factors on setting time, water secretion rate, and compressive strength of the RW material. The scanning electron microscope (SEM) was used to compared the micromorphological characteristics of RW and conventional Portland cement material (PC). The results showed that the hydration products of RW were mostly smack ettringite, calcium silicate hydrate gel, and calcium hydroxide, which interweaved with each other to form a network structure that was denser than the PC material. Furthermore, the interface bonding degree between RW and injected coal was tighter than that of PC, without obvious cracks at the slurry–coal interface. The results indicate that the addition of composite coagulant can significantly accelerate the hydration process of RW material and also enhance the interface strength of injected coal, which is conducive to improving the grouting quality and sealing effect of the extraction borehole.

Experimental Research on Performance of New Gas Drainage Borehole Sealing Material with High Fluidity

Microscopic properties and sealing performance of new gas drainage drilling sealing material

Performance of New Inorganic Retarding Sealing Material for Gas Drainage Boreholes

Experimental study comparing the microscopic properties of a new borehole sealing material with ordinary cement grout

Development and Application of Water Sealing Technology for Gas Drainage Boreholes

Experimental Investigation of Cement-Based Sealing Materials for Degasification Using Coal-Bed Methane Drainage System

Preparation of a New Borehole Sealing Material of Coal Seam Water Infusion

Development and performance testing of the new sealing material for gas drainage drilling in coal mine

Study on the mechanical properties and microstructure of a rich-watered grouting material

Performance and application of new inorganic retarding sealing material suitable for multi-scale fractures

Preparation and Performance of Microencapsulated Sealing Material for Coal Mine Gas Drainage

Experimental Study on the Optimization of Polymer-Modified Cement-Based Composite Sealing Materials and Mechanical Properties and Permeability of Cemented Coal Bodies

Fluidity Influencing Factors Analysis and Ratio Optimization of New Sealing Materials Based on Response Surface Method

Parameter Optimization of Constant Pressure Grouting Technology for Borehole Sealing with Inorganic Noncondensable Material in Tectonic Coalbed of South China

Experimental Investigation of the Use of Expansive Materials to Increase Permeability in Coal Seams Through Expansive Fracturing

Comparative analysis of sealing effect of different hole sealing processes in coal mine

Effect of nano-SiO2/styrene-acrylic emulsion on compactness and strength of mine drilling seal materials

Study on Performance Optimization of Water-Rich Grouting Materials Based on Response Surface Methodology

Study on the Mechanics and Pore Characteristics of Coal Seam Drilling Sealing Materials Based on Nanomaterial Optimization.

Study on key grouting blocking parameters of gas drainage boreholes in soft coal seams

Research and application of hydraulic fracturing borehole bag sealing technology