Abstract:In welding process, it is widely accepted that grain refinement is an effective way to improve the properties of welding joints. When fine equiaxed grain was formed in the microstructure of welding joints, the tendency of welding crack would be decreased, and mechanical properties would be improved [1] . In seeing this, both metallurgical methods, by adding alloying elements in the welding pool, and mechanical methods, by mechanically stirring or vibrating the welding pool, have been broadly investigated to refine grains. In practice, a lot of methods, such as mechanical vibration [2-3] , ultrasonic vibration [4-5] , pulse current [6-7] , electromagnetic stirring, has been implemented to stir or vibrate the welding pool and thus refine the grains. During all of such mechanical methods, electromagnetic stirring distinguished itself by its lower investment and applicability. Generally, research on electromagnetic stirring welding concentrates on three aspects listed as arc behaviors, analysis of microstructure & properties, and model of welding arc & pool. In all of three concerns mentioned above, arc behaviors are so general and basic for understanding the mechanism of electromagnetic stirring, because arc behaviors are responsible for the heat transfer, heat distribution, penetration and vibration of weld pool. So, research on arc behaviors should be stressed and given a priority. Many researchers have done a lot of work about welding arc and acquired many great achievements [8-14] , even though it is a very long and hard journey. In present paper, MHD equations are built in order to describe the GTAW arc behavior at external constant axial magnetic field. With the help of CFD software FLUENT, the GTAW arc behaviors are studied and discussed. The arc pressure is measured and the results are used to validate the model. 2. Experimental system Fig.1 shows the experimental system used in this work. We made an exciting coil, and a DC power provides the exciting current, and then the coil generates the axial magnetic field. The arc pressure is investigated by the data collecting card and the pressure sensor which is connected with the hole in the center of the water-cooled copper.

Study on Electromagnetic Force in Arc Plasma with UHFP-GTAW of Ti-6Al-4V

Effect of pulse frequency on microstructure and properties of Ti-6Al-4V by ultrahigh-frequency pulse gas tungsten arc welding

Numerical Analysis of GTAW Arc Behaviors in External Axial Magnetic Field

Numerical Study of Arc Plasmas and Weld Pools for Gtaw with Applied Axial Magnetic Fields

Numerical Analysis of Arc Physics and Energy Transfer under Circumferential Gas Constraint Effect

Arc Shape Characteristics with Ultra-High-Frequency Pulsed Arc Welding

Numerical Analysis of Ultrasonic Waves in the Gas Tungsten Arc Welding (GTAW) with Ultrasonic Excitation of Current

Arc characteristics in alternating magnetic field assisted narrow gap pulsed GTAW

Plasmas flow force of welding arc

Microstructure, Tensile Properties of Ti-6Al-4V by Ultra High Pulse Frequency GTAW with Low Duty Cycle

Transient characteristics of ultra-high frequency adjustable multi-pulse gas tungsten welding arc

Numerical Analysis of Internal Flow of Molten Pool in Pulsed Gas Tungsten Arc Welding Using a Fully Coupled Model with Free Surface

Understanding the Changing Mechanism of Arc Characteristics in Ultrasound-Magnetic Field Coaxial Hybrid Gas Tungsten Arc Welding

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

A New Method for Refinement of Ti-6Al-4 V Prior-Β Grain Structure in the Alternating Magnetic Field Assisted Narrow Gap Gas Tungsten Arc Welding (AMF-GTAW) Via Filler Wire Oscillation

Study on arc shape, weldment microstructure, and mechanical properties of Ti-6Al-4V welded by FFDP TIG waveform

Simulation of welding arc in axial magnetic field

Numerical Analysis of Arc and Molten Pool Behaviors in High Speed Tandem TIG Welding of Titanium Tubes

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

2D Self-Consistent Modeling of Arc–electrode Interaction in GTAW Using a Finite Volume Method