Abstract:This paper reports a high-speed packaging for Silicon Mach-Zehnder modulators (MZMs). The radio frequency (RF) input port of the package is commercially available GPPO type. High-frequency ceramic substrate is designed to shorten the length of gold wire to suppress the RF attenuation. Gratings and single-mode fibers using inclined-surface coupling are used to realize low-loss and large tolerance coupling. In measurement, clear eye diagrams with ER of 10.1 dB and 7.6 dB were obtained at 25 Gb/s and 40 Gb/s modulations. Silicon photonics has become a hot research topic in the field of optoelectronics in recent years, since silicon–based optical device can achieve high density integration, low power consumption, low cost photonic devices, realize monolithic integration with electronic devices, and it is compatible with traditional CMOS processes [1]. Silicon electro-optic modulators which are key devices in optoelectronic information transmission and processing have got great developments in recent years. High speed OOK silicon modulators have been demonstrated [2-4]. The silicon modulator packaging has also been studied [5-6]. However, the operating speed of packaged silicon modulators still need to be improved. Our butterfly package for silicon modulator is illustrated in Figure 1. Two main designs were applied for high speed packaging: the modulator chip was designed with reverse PN mode, whose PN junction capacitance is smaller and the modulator electrode was carefully designed using CPW travelling-wave electrodes; GCPW transmission lines with metallic holes were adopted to fabricate the high-frequency ceramic substrates to make the high-speed electrical signal effective loading on the electrode of the MZM chip. Since micro-strip-like line (MSL) mode in GCPW line might exist, which usually cause energy coupling of CPW mode and prompt a microwave resonant of transmission response in high frequency range [7], we made metallic holes on a transmission line to suppress the microwave resonant [8-9]. Grating coupler and single-mode fiber with inclined-surface are used in optical coupling. The advantages of this optical coupling method is larger misalignment tolerance and cheap cleaved fiber packaging. Nickel metal tube is installed close to the inclined-surface of single-mode fiber, the position and angle of the optical fiber is adjusted by special fixture clamping nickel metal tube and adjusting the special fixture. Assuming the optical fiber is parallel to the chip surface, there is a relation of θ=2*φ-90o. We choose the φ=51 deg. as our grating incidence angle is 12 degree. Eye-diagram measurements were carried to demonstrate the high-speed operation of the packaged modules. Experimental results were presented in Fig. 4(a) and 4(b). Clear eye diagrams with ERs of 10.1 dB and 7.6 dB were obtained at 25 Gb/s and 40 Gb/s modulation speed. By improving the welding between the pin of GPPO connector and ceramic substrates, further reducing the length of gold wires from the ceramic substrates to the modulator pads, the speed of the packaged MZM module could be higher.

Broadband Modulation Performance of 100-Ghz EO Polymer MZMs

100-Gbit/s Amplitude and Phase Modulation Characterization of a Single-Drive, Low-Vπ Polymer Mach-Zehnder Modulator

High-Baudrate Silicon Photonics Ring Resonator and Mach-Zehnder Modulators for Short-Reach Applications

Breaking the Baud Rate Ceiling of Electro-Optic Modulators Using Optical Equalization Technique

A 100 Gbaud On-off-Keying Silicon-Polymer Hybrid Modulator Operating at Up to 110°C

High-speed, low-loss silicon Mach-Zehnder modulators with doping optimization.

Improved Extinction Ratio of Mach-Zehnder Based Optical Modulators on CMOS Platform

Design and Performance of a Polymer Mach-Zehnder Interferometer Electro-Optic Modulator at 1.55 Μm

60 Gbit/s Silicon Modulators with Enhanced Electro-Optical Efficiency

High-speed packaging for silicon modulator

A Silicon Optical Single Sideband Modulator with Ultra-High Sideband Suppression Ratio

High-speed Silicon Modulators for the 2 Μm Wavelength Band

Design Optimization and Implementation of Silicon Mach-Zehnder Electro-Optic Modulators

110 Gbit/S On-Off Keying Transmitter Based On A Single-Drive Polymer Modulator

Optimized Silicon Mzi Modulators for 50 Gbit/S Ook and 40 Gbit/S Bpsk Modulation

High Baud Rate All-Silicon Photonics Carrier Depletion Modulators

Highly Reliable Organic Polymer Optical Modulators

Requirement of Modulation Bandwidth for 100gb/s Optical DQPSK Transmission Using One Dual-Drive Mach Zehnder Modulator

Single-drive Push-Pull Silicon Mach-Zehnder Modulator for OOK and BPSK Modulation

High Baud Rate Transmission with Silicon Photonic Modulators

190Gbaud OOK signal generation with a sub-sampling rate of 0.63 using silicon photonic dual-drive Mach–Zehnder modulator