Abstract:The joint made of cast steel is frequently utilized within a treelike column structure to ensure a smooth transition. It is of great significance in ensuring the overall structural safety, but currently, the mechanical property and bearing capacity of this type of joint cannot be fully understood. This study investigates the load characteristics of three-forked cast steel joints through concrete experiments, finite element analysis, and regression method formula derivation, filling the gap in mechanical properties and calculation formulas of forked cast steel joints. Initially, a comprehensive model of the cast-steel joint, sourced from a practical engineering, underwent vertical load testing. Detailed scrutiny of stress distribution and vertical displacement of the tested joint was conducted based on the experimental outcomes. Subsequently, a finite element model of the tested joint was constructed using SolidWorks and subjected to analysis via ANSYS. The numerical findings were juxtaposed with experimental data and extrapolated to encompass other parametric scenarios. Ultimately, a regression analysis method was employed to derive a calculation formula for the load-carrying capacity of branch-bearing cast-steel joints. The regression analysis method can accurately obtain the load-bearing capacity calculation formula for tree-shaped joint models and can be extended to determine corresponding branch and main pipe dimensions, as well as the deviation angle between branches and the main pipe, under known load conditions. This improves design efficiency and accuracy. Comparative analysis reveals a substantial concurrence among experimental, finite element analysis, and formula-based predictive outcomes. The maximum error between experimental results and those obtained from finite element analysis is 9.02%. The maximum error between the results calculated using the load-bearing capacity formula derived from regression methods and those from finite element analysis is only 1.9%.

Numerical analysis of Y-type cast steel joint for Guangzhou New Railway Station

An analytical method and its application for large-section PC box girder bridges

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Experimental study of static behavior of Y-type cast-steel joint in west Nanchang Railway Station

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

PERFORMANCE RESEARCH ON LARGE CAST-STEEL NODE UNDER COMPLEX STRESS STATE

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

FINITE ELEMENT PARAMETRIC ANALYSIS OF CAST STEEL JOINTS FOR TANGSHAN LETAI CENTRE

Experimental investigation and simulation analysis of cast-steel joints under vertical pressure

A method for stress concentration factor determination of welded steel bridge T-joints under moving load

Experimental Evaluation of Stress Concentration Factor of Welded Steel Bridge T-Joints

Non-linear Analysis on Axially Loaded Cast Tubular T-joints Including the Effects of Fillet Parameter

Experimental and numerical study of steel-to-concrete joint section in hybrid cable-stayed bridges

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

FINITE-ELEMENT ANALYSIS OF SHEAR BEHAVIOR OF JOINT STRUCTURE IN SEGMENTAL CONSTRUCTION CONCRETE BOX GIRDER

Non-Linear Analysis of Ultimate Loading Capacity of Cast Tubular Y-Joints under Axial Loading

Non-linear Analysis on Cast Tubular T-joint Loaded by In-Plane Bending

Nonlinear Analysis on Ultimate Flexural Bearing Capacity of the N-Shaped Steel Tubular Joints

Analysis of Mechanical Properties of Joint Structure in External Pre-Stressing Concrete Bridges

Experimental and numerical investigations on stress concentration factors of concrete filled steel tube X-joints

Experimental study of type and Y-type joints of the concrete-fillled rectangular steel tube truss