Abstract:Summary form only given. The 3rd Generation Partnership Project (3GPP) has provided successful reports and specifications for Long Term Evolution (LTE). The LTE system is the so-called 4G system. A major difference between LTE and its 3G predecessor is that orthogonal frequency division multiplexing (OFDM) and multiple-input multiple-output (MIMO) techniques are employed in the LTE system, thanks to which a much higher throughput can be achieved in the LTE system. To evaluate LTE with end-user experience, over-the-air (OTA) testing of the performances of LTE devices is needed. Among the MIMO-OTA testing techniques, the reverberation chamber (RC) based OTA testing system [1, 2] seems the most promising candidate due to its fast and repeatable measurement. Despite the high efficiency of the RC-based OTA measurement, a theoretical model of the OTA measurement to complement measurement is desired. With throughput being the most interesting performance metric of LTE OTA testing, a throughput model based on the threshold receiver concept has been proposed in [3]. The throughput model is valid for both diversity and spatial multiplexing cases [4]. The reverberation chamber was first used for EMC measurements, i.e. measuring the effects of undesired radiation. Then, measurement uncertainty was not important. In this paper we describe how it is used for measuring the effects of desired radiation, and then we of course would like to have measurement uncertainties smaller than 0.5 dB in order to distinguish good from bad LTE devices. This is possible with the latest RC developments [5]. Fig. 1 shows the modeled and measured LTE system with different system bandwidth Bs under different channel coherence bandwidths Bc. Note that the coherence bandwidth in the RC can be controlled by loading the chamber with different amounts of lossy objects [6], whereas, in the simulation, it is taken into account by generating independent OFDM subcarriers [3]. As can be - een, the throughput model well predicts the measurement. In the final presentation, we will present the throughput model in details. We will also present LTE throughput measurements and modeling for different LTE MIMO configurations, the relationship between Total Isotropic Sensitivity (TIS) and throughput, and the interpretation of throughput as a Probability of Detection (PoD).

Channel Sounding of Loaded Reverberation Chamber for Over-the-Air Testing of Wireless Devices: Coherence Bandwidth Versus Average Mode Bandwidth and Delay Spread

Relations Between Coherence Bandwidth and Average Mode Bandwidth in Reverberation Chamber for Wireless Device Measurement

Estimation of Average Rician K-Factor and Average Mode Bandwidth in Loaded Reverberation Chamber

Overview of State-of-the-art OTA Measurements of Wireless Devices in Reverberation Chamber

Characterization of Reverberation Chambers for OTA Measurements of Wireless Devices: Physical Formulations of Channel Matrix and New Uncertainty Formula

Effects of Signal Bandwidth on Total Isotropic Sensitivity Measurements in Reverberation Chamber.

On OTA Test in the Presence of Doppler Spreads in a Reverberation Chamber

Angular Spectrum for Wireless Over-the-Air Measurements in the Loaded Reverberation Chamber

Base station over-the-air testing in reverberation chamber

Reverberation Chambers for Over-the-Air Tests: an Overview of Two Decades of Research

Empirical Characterization and Modeling of the Propagation Channel Inside the VIRC

Probability Distribution of the Coherence Bandwidth of a Reverberation Chamber

Over-The-Air Lte Measurements in the Reverberation Chamber

Spatial Characterization of Coherence Bandwidth for 72 Ghz Mm-Wave Indoor Propagation Channel

Development and Validation of New Reverberation Chamber for Wireless Devices

A Switchable Metamaterial Absorber for Fine Tuning of the Coherence Bandwidth in a Reverberation Chamber

Effects of User Proximity on Total Radiated Power and Total Isotropic Sensitivity Measurements in Reverberation Chambers.

A Realisation of Channel Emulation in a Reverberation Chamber method for Over-the-Air Compliance Testing in Support of 3GPP Standardisation

Direct coupling as a residual error contribution during OTA measurements of wireless devices in reverberation chamber

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

An Analysis of Reverberation Fluctuation by Mean Square Derivation